APT75GT120JU3 ISOTOP® Buck chopper Trench IGBT Application · AC and DC motor control · Switched Mode Power Supplies C G E A A E Features · Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated · ISOTOP® Package (SOT-227) · Very low stray inductance · High level of integration Benefits · Low conduction losses · Stable temperature behavior · Very rugged · Direct mounting to heatsink (isolated package) · Low junction to case thermal resistance · Easy paralleling due to positive TC of VCEsat C G VCES = 1200V IC = 75A @ Tc = 80°C ISOTOPÒ Absolute maximum ratings Parameter Collector - Emitter Breakdown Voltage TC = 25°C Max ratings 1200 100 75 175 ±20 416 TC = 80°C 27 TC = 25°C TC = 80°C TC = 25°C Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation IFAV Maximum Average Forward Current Duty cycle=0.5 IFRMS RMS Forward Current (Square wave, 50% duty) 34 Unit V A V W A These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1-7 APT75GT120JU3 – Rev 0 April, 2004 Symbol VCES IC1 IC2 ICM VGE PD APT75GT120JU3 All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic BVCES Collector - Emitter Breakdown Voltage ICES Zero Gate Voltage Collector Current VCE(on) Collector Emitter on Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0V, IC = 5mA VGE = 0V, VCE = 1200V Tj = 25°C VGE =15V IC = 75A Tj = 125°C VGE = VCE, IC = 3mA VGE = ±20V, VCE = 0V Min Typ Max 1200 1.4 1.7 2.0 5.0 5 2.1 Unit V mA V 6.5 500 V nA Max Unit Dynamic Characteristics Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Test Conditions VGE = 0V VCE = 25V f = 1MHz Resistive Switching (25°C) VGE = 15V VBus = 600V IC = 75A RG = 4.7W Inductive Switching (125°C) VGE = 15V VBus = 600V IC = 75A RG = 4.7W APT website – http://www.advancedpower.com Min Typ 5340 280 240 260 30 420 70 290 45 520 90 7 9.5 pF ns ns mJ 2-7 APT75GT120JU3 – Rev 0 April, 2004 Symbol Cies Coes Cres Td(on) Tr APT75GT120JU3 Diode ratings and characteristics Symbol VF Characteristic Diode Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance Reverse Recovery Time trr Test Conditions IF = 30A IF = 60A IF = 30A VR = 1200V VR = 1200V VR = 200V IF=1A,VR=30V di/dt =100A/µs Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C 31 IF = 30A VR = 800V di/dt =200A/µs Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C 370 500 5 12 660 3450 220 4650 37 Reverse Recovery Time IRRM Qrr trr Qrr IRRM Maximum Reverse Recovery Current Reverse Recovery Charge Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A VR = 800V di/dt =1000A/µs Min Typ 2.0 2.3 1.8 Max 2.5 V 250 500 32 Tj = 125°C Unit µA pF ns A nC ns nC A Thermal and package characteristics Symbol Characteristic RthJC RthJA VISOL TJ,TSTG TL Torque Wt Min Typ IGBT Diode Junction to Case Junction to Ambient (IGBT & Diode) RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Storage Temperature Range Max Lead Temp for Soldering:0.063” from case for 10 sec Mounting torque (Mounting = 8-32 or 4mm Machine and terminals = 4mm Machine) Package Weight 2500 -55 Max 0.3 1.1 20 Unit °C/W V 150 300 1.5 29.2 °C N.m g Operating Frequency vs Collector Current 40 V CE=600V D=50% RG=4.7Ω TJ =125°C 35 30 25 20 15 10 5 0 0 20 40 60 80 100 120 IC (A) APT website – http://www.advancedpower.com 3-7 APT75GT120JU3 – Rev 0 April, 2004 Fmax, Operating Frequency (kHz) Typical IGBT Performance Curve APT75GT120JU3 Output Characteristics (V GE=15V) Output Characteristics 150 150 TJ = 125°C 125 TJ=25°C TJ=125°C VGE=17V 100 75 VGE=15V 75 50 50 25 25 0 VGE=9V 0 0 1 2 3 4 0 1 2 V CE (A) VCE (V) 4 20 TJ=25°C 125 V CE = 600V VGE = 15V RG = 4.7Ω TJ = 125°C 17.5 15 TJ=125°C E (mJ) 100 IC (A) 3 Energy losses vs Collector Current Transfert Characteristics 150 75 50 12.5 Eoff Eon 10 7.5 5 25 2.5 0 0 5 6 7 8 9 V GE (V) 10 11 0 12 75 100 125 150 Reverse Safe Operating Area 175 Eon 150 IC (A) 12 50 200 VCE = 600V VGE =15V IC = 75A TJ = 125°C 14 25 IC (A) Switching Energy Losses vs Gate Resistance 16 E (mJ) V GE=13V 100 IC (A) IC (A) 125 Eoff 10 125 100 75 8 V GE=15V TJ=125°C RG=4.7Ω 50 6 25 4 0 0 4 8 12 16 20 24 Gate Resistance (ohms) 28 32 0 400 800 VCE (V) 1200 1600 maximum Effective Transient Thermal Impedance, Junction to Pulse Duration 0.3 0.25 IGBT 0.9 0.7 0.2 0.15 0.1 0.05 0 0.00001 0.5 0.3 0.1 Single Pulse 0.05 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) APT website – http://www.advancedpower.com 4-7 APT75GT120JU3 – Rev 0 April, 2004 Thermal Impedance (°C/W) 0.35 APT75GT120JU3 APT website – http://www.advancedpower.com 5-7 APT75GT120JU3 – Rev 0 April, 2004 Typical Diode Performance Curve APT website – http://www.advancedpower.com 6-7 APT75GT120JU3 – Rev 0 April, 2004 APT75GT120JU3 APT75GT120JU3 SOT-227 (ISOTOP®) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 1.95 (.077) 2.14 (.084) Anode 30.1 (1.185) 30.3 (1.193) Collector * Emitter terminals are shorted internally. Current handling capability is equal for either Emitter terminal. 38.0 (1.496) 38.2 (1.504) Emitter Gate ISOTOP® is a Registered Trademark of SGS Thomson APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website – http://www.advancedpower.com 7-7 APT75GT120JU3 – Rev 0 April, 2004 Dimensions in Millimeters and (Inches)