DATA SHEET Part Number: SL08 12101 Ordering Different Lead Types: Inside Kinked Leads Outside Kinked Leads Use -A after Ametherm’s part # Not Available For example: to order an inside kinked lead use part number SL08 12101-A D D D T C B L S S S STRAIGHT LEADS OUTSIDE KINKED LEADS INSIDE KINKED LEADS Electrical Specifications: Mechanical Specifications: Resistance @ 25°C Max Steady State Current Up to 65°C Max Recommended Energy Rating (Joules) Actual Failure Point of Instantaneous Energy (Joules) Resistance @ 100% of Max Current Resistance @ 50% of Max Current Body Temperature @ 100% Current Rating Dissipation Constant Thermal Time Constant Material Type Temperature Coefficient Max Operating Temperature Dielectric for Coating Material 120.0 Ω±25% 1.0 A 9.0 J 18.0J 0.89 Ω 1.80 Ω 95°C 9.0mW/°C 20seconds “I” -3.4%/°C 150°C 500VAC for 1.0 min CSA File #: CA 118061 D T Lead Diameter S L Straight Leads Coating Run Down B C 8.0 ± 0.5 mm 4.0 ± 0.5 mm 0.5 ± 0.1 mm 5.0 ± 2.0 mm 38.0 ± 3.0 mm 5.0 ± 1.0 mm 5.5 ± 0.50 mm 1.50 ± 0.2 mm Revision Date: March 19, 2003 Ametherm, Inc. 3111 N. Deer Run Road #4 Carson City, NV 89701 Telephone: (800) 808-2434 (775) 884-2434 Fax: (775) 884-0670 www.ametherm.com