Model BD2425P50100A00 REV A Nano Profile 0404 Balun 50Ω to 100Ω Balanced Description The BD2425P50100A00 is a low cost, nano profile sub-miniature unbalanced to balanced transformer designed for differential inputs and output locations on modern chipsets in an easy to use surface mount package. The BD2425P50100A00 has been developed for placement inside highly integrated, over moldable packaging solutions where overall module height is of greatest concern. Ideal for high volume manufacturing and delivers higher performance than traditional ceramic baluns in a sub 0.5mm height profile. The BD2425P50100A00 has an unbalanced port impedance of 50Ω and a 100Ω balanced port impedance. This transformation enables single ended signals to be applied to differential ports on modern integrated chipsets. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD2425P50100A00 is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. Features: • • • • • • • • • 2400 – 2500 MHz 0.45mm Height Profile 50 Ohm to 2 x 50 Ohm Low Insertion Loss 802.11 b+g MIMO b+g Bluetooth Zigbee Proprietary Ultra Low Power Radio • Surface Mountable • Tape & Reel • RoHS Compliant Parameter Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling Operating Temperature ROOM (25°C) Min. 2400 Typ. Max 2500 50 100 25 0.6 0.9 6 24 16 0.9 1.5 9 1 +85 -55 Unit MHz Ω Ω dB dB dB Degrees dB Watts ºC * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 ºC) Outline Drawing Top View (Near-side) Side View Bottom View (Far-side) .018±.001 [0.45±0.03] .041±.004 [1.05±0.10] .012 [0.30] 1 0.12 [0.30] 2 3x.010 [0.25] .041±.004 [1.05±0.10] 4 .020 [0.50] .020 [0.50] 3 3x.010 [0.25] Pin Designation GND / DC Feed 1 + RF GND 2 Unbalanced Port 3 Balanced Port 4 Balanced Port Dimensions are in Inches [Millimeters] Mechanical Outline Available on Tape and Reel for Pick and Place Manufacturing. Tolerances are Non-Cumulative USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model BD2425P50100A00 REV A Typical Performance:2300 MHz. to 2600 MHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 1.5 15 1 10 0.5 5 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 -33 2600 2550 2500 2450 2400 -36 2350 2450 2600 -20 2550 -2 2500 -15 2450 -1.5 2400 -10 2350 -1 2400 0 -5 2350 0 -0.5 2300 deg 20 2300 2600 Phase Balance 2 2300 [dB] Amplitude Balance [dB] 2600 Frequency [MHz] Frequency [MHz] Frequency [MHz] USA/Canada: Toll Free: Europe: 2550 2300 2600 2550 2500 -3.6 2450 -36 2400 -3.3 2350 -3 -33 2550 -2.7 -30 2500 -2.4 -27 2500 -2.1 -24 2450 -1.8 -21 2400 -18 2350 [dB] 0 2300 [dB] Return Loss - Input 0 (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model BD2425P50100A00 REV A Wide Band Performance: 500 MHz. to 8500 MHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 7000 7500 8000 8500 7500 8000 8500 5500 5500 5000 4500 4000 8500 8500 3500 8000 8000 3000 7500 7500 2500 7000 7000 2000 6500 6500 500 6000 6000 -20 5500 -2 5000 -15 5500 -1.5 4500 -10 4000 -1 1500 0 -5 1000 0 -0.5 3500 6500 5 3000 7000 0.5 2500 6000 10 2000 6500 15 1 deg 1.5 1500 5000 Phase Balance 20 1000 6000 Amplitude Balance 2 500 4500 Frequency [MHz] Frequency [MHz] [dB] 4000 500 8500 8000 7500 7000 6500 6000 5500 5000 4500 4000 3500 3000 2500 -3.6 2000 -36 1500 -3.3 1000 -3 -33 3500 -2.7 -30 3000 -2.4 -27 2500 -2.1 -24 2000 -1.8 -21 1500 -18 1000 [dB] 0 500 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 5000 4500 4000 3500 3000 2500 2000 1500 1000 -36 500 [dB] -15 Frequency [MHz] Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model BD2425P50100A00 REV A Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/oC. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. With No DC Bias 3X .011 [0.29] .008 [0.21] 3X .011 [0.29] With DC Bias 3X Transmission Line .008 [0.21] .014 [0.36] .008 [0.21] .020 [0.50] 3X .011 [0.29] 3X Transmission Line .020 [0.50] Circuit Pattern Footprint Pad (s) Footprint Pad (s) USA/Canada: Toll Free: Europe: Dimensions are in Inches [Millimeters] Mounting Footprint (315) 432-8909 (800) 411-6596 +44 2392-232392 .014 [0.36] .008 [0.21] .020 [0.50] Circuit Pattern Solder Resist Plated thru hole to ground 3X .011 [0.29] Plated thru hole to ground Available on Tape and Reel for Pick and Place Manufacturing. Solder Resist .020 [0.50] Dimensions are in Inches [Millimeters] Mounting Footprint Model BD2425P50100A00 REV A Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. ØA ØC ØD QUANTITY/REEL 4000 TABLE 1 REEL DIMENSIONS (inches [mm]) ØA 7.00 [177.8] B 0.32 [8.0] ØC 2.0 [50.8] ØD 0.512 [13.0] B Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392