RoHS Compliant Model RFP-800-100R-S Flanged Resistor 800 Watts, 100Ω General Specifications Resistive Element Substrate Cover Mounting flange Leads Thick film Beryllium oxide ceramic Alumina ceramic Copper, nickel plated per QQ-N-290 99% pure silver (.005” thick) Electrical Specifications Features: • DC – 250 MHz • 800 Watts • BeO Ceramic • Non-Nichrome Resistive Element Resistance Range: Frequency Range; Power: Capacitance: 100 ohms, ± 5% DC – 250 MHz 800 Watts 14 pF Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. Operating temperature is -55ºC to 155ºC (see chart for derating temperatures). All dimensions in inches. Specifications subject to change with out notice. • Welded Silver Leads • 100% Tested • RoHS Compliant Outline Drawing 800-100R-S (097) Rev B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-800-100R-S RoHS Compliant Typical Performance: Power De-rating: Mounting Footprint and Procedure: .025 MIN. (2 PLACES) BOARD LOWER THAN LEAD. BOARD EVEN WITH LEAD. BOARD LOWER THAN LEAD. BOARD HIGHER THAN LEAD. SUGGESTED STRESS RELIEF METHODS NOT RECOMMENDED APPLICATION SCALE: NONE SCALE: NONE 800-100R-S (097) Rev B USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.