Model RFP-150-50TCGF-S RoHS Compliant Full Flange Termination 150 Watts, 50Ω General Specifications Resistive Element Substrate Cover Mounting Flange Lead(s) Operating Temperature Thick film Beryllium oxide ceramic Alumina ceramic Copper, nickel plated per QQ-N-290 99.9% pure silver (.005” thick) -55 to +150°C (see de rating chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Features: • RoHS Compliant • 150 Watts • DC – 2.0 GHz • Beryllium oxide Ceramic Electrical Specifications Resistance Value: Power: Frequency Range: VSWR 50 Ohms, ± 5% 150 Watts DC – 2.0 GHz 1.30 : 1 Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change. • Welded Silver Leads • Non-Nichrome Resistive Element • Low Return Loss • 100% Tested Outline Drawing 1 0F P5G F0 C R5 T US RE HC TA .L AP I D2 1 6 1 . ( ) Dimensions inches 150-50TCGF-S (097) Rev B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model RFP-150-50TCGF-S RoHS Compliant Typical Performance: Derating: Mounting Footprint and Procedure: 150-50TCGF-S (097) Rev B USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.