�������������������������������������������� ���� �������������������������������������������������������������� � � � � � � � � � � � � � � � INTRODUCTION �� ��� ��� ��� ���� � ������ ��� ���� ��� ��� �� ��� ��� ��� Quantity 1 1 1 1 1 1 Box/10 ��� ��� ��� ��� �� �� �� ��� ��� ���� ��� ��� HWRE02 contains the following: 4 #8 x .375" Panhead Screws 4 #8 x .375" Hex Spacers 4 #8 x 2.00" Hex Stand Offs 2 #6 x 1.25" Panhead Screws 2 #6 x 5/16" Hex Nuts ���� ���� ��� Description Heatsink PC Board Mating Socket Hardware Kit 8-Pin Wire Wrap Socket Thermal Washer ��� PARTS LIST Part # HS13 EVAL01 MS03 HWRE02 HWRE05 TW0 3 ��� ��� ��� This easy-to-use kit provides a platform for the evaluation of the PB50 and PB58 high voltage power boosters. The PB50 and PB58 are designed most commonly in combination with a small signal, general purpose op amp. However, they can also be used without a driver amplifier. This kit can be used to analyze a multitude of standard or proprietary circuit configurations. ��� ��� ��� ��� ��� ��� ������ ����� ��� ��� ��� ����� ASSEMBLY ������������������������ ������������ ���������� ����������� ������������ ���������� ������������ ������������ ���������������������� ������������� ���������������� �������� ��������������� ������������������ ������������� ���������� ����������� ��������� ������� ���������� �������������� ������������ ������������� CAUTION 1. Use thermal grease or Apex Thermal Washer TW03 between power booster and heatsink. 2. Use 18 gauge teflon sleeve on at least two opposite pins 3. Mounting torque greater than 7 in•lbs on power booster mounting bolts will void warranty! APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 • ORDERS (520) 690-8601 • EMAIL [email protected] 1 EK50 EVALUATION KIT FOR PB50/PB58 POWER BOOSTERS EQUIVALENT SCHEMATIC � � � ��� ���� � � ��� � � � � �� ���� ��� � ���� � � � ����� �� � � ��� ���� � ��� ���� � �� � ��� �� � � ��� � ��� ���� ���� � � � ��� ��� � ���� � � � � ��� This data sheet has been carefullyCORPORATION checked and is believed to be NORTH reliable, however, no responsibility is assumed for possible inaccuracies omissions. All specifications HOTLINE: are subject to1change notice. APEX MICROTECHNOLOGY • 5980 SHANNON ROAD • TUCSON, ARIZONA 85741 •orUSA • APPLICATIONS (800)without 546-2739 2 EK50U REV D OCTOBER 2004 © 2004 Apex Microtechnology Corp.