PM900 SERIES Single and dual output • • • • • • The PM900 Series of 5 and 6 Watt DC/DC converters are a broad line of high performance modules with many important features and specifications as standard. All models contain Pi-type input filters to minimise reflected ripple current. They are packaged in low profile 2.0 x 2.0 x 0.4 inch cases with standard and two alternate pin-outs designed for direct PC card mounting. The units also feature output current limiting, short-circuit protection and input/output isolation of 500VDC. Other specifications include: an efficiency of 65%; line regulation of ±0.02%; load regulation of ±0.04% for single output models and ±0.05% for dual output models; low ripple and noise (10mV pk-pk for single output models and 6mV pk-pk for dual output models); and an output voltage accuracy of ±1.0%. PM900 Series DC/DC converters are intended for a wide variety of general industrial applications, especially where low noise performance is required. [ 2 YEAR WARRANTY ] SPECIFICATION Extremely tight line and load regulation Short circuit protection Pi input filter Low ripple output current Conducted noise EN55022, EN55011 level B Linear topology for high output accuracy and regulation All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage accuracy ±1.0%, max. Conducted emissions EN55022, EN55011, FCC 15 Line regulation NL to FL ±0.02% GENERAL SPECIFICATIONS Load regulation FL to NL, Single outputs FL to NL, Dual outputs ±0.04% ±0.05% Efficiency Cross regulation Dual outputs (Voltage balance) Ripple and noise 20MHz BW Single output Dual output Transient recovery time to 0.1% of final value 10mV pk-pk, typical, 65mV pk-pk, max. 6mV pk-pk, typical, 35mV pk-pk, max. NL to FL, all outputs FL to NL, single output FL to NL, dual output Temperature coefficient Single output Dual output Current limit Short circuit protection ±0.5%, max 10µs 200µs 20µs ±0.02%/°C ±0.01%/°C Input voltage range See table on facing page See Note 3 61%, min. 62%, min. 500VDC, min. Switching frequency Fixed Case material UL94V-0 Weight 20kHz, min. Non-conductive black plastic 57g (2oz) MTBF 680,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating ambient –25°C to +71°C Non-operating amb. –40°C to +125°C Case +95°C, max Derating None required Cooling Free-air convection cooled Relative humidity Non-condensing 20% to 95% RH Altitude Operating Non operating 10,000 feet max. 40,000 feet max. Vibration 5Hz to 500Hz 2.4G rms (approx.) Thermal limit INPUT SPECIFICATIONS Input filter Isolation voltage 130% to 180% Iout See Note 4 Single output Dual output Level B Pi network Data Sheet © Artesyn Technologies® 2000 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. PAGE 1 SPECIAL APPLICATION MODELS | 5-6W DC/DC 5 to 6 Watt Nominal input DC/DC converters INPUT OUTPUT OUTPUT INPUT CURRENT VOLTAGE VOLTAGE CURRENT NO LOAD FULL LOAD REFLECTED RIPPLE CURRENT (1) LINE LOAD 3 4 ALT. PIN-OUT MODEL (2) NUMBER 5VDC 5VDC 1000mA 125mA 1.54A 54mA ±0.02% ±0.04% 5VDC 12VDC 470mA 140mA 1.73A 61mA ±0.02% ±0.04% PM903 5VDC 15VDC 400mA 150mA 1.84A 64mA ±0.02% ±0.04% PM904 5VDC ±12VDC ±230mA 130mA 1.65A 58mA ±0.02% ±0.05% A PM951 5VDC ±15VDC ±190mA 135mA 1.7A 60mA ±0.02% ±0.05% B PM952 12VDC 5VDC 1000mA 50mA 0.64A 22mA ±0.02% ±0.04% PM911 12VDC 12VDC 470mA 60mA 0.72A 26mA ±0.02% ±0.04% PM913 12VDC ±12VDC ±230mA 55mA 0.69A 24mA ±0.02% ±0.05% PM961 12VDC ±15VDC ±190mA 55mA 0.71A 25mA ±0.02% ±0.05% 24VDC 5VDC 1000mA 25mA 0.32A 22mA ±0.02% ±0.04% PM921 24VDC 12VDC 470mA 30mA 0.36A 25mA ±0.02% ±0.04% PM923 24VDC 15VDC 400mA 30mA 0.38A 27mA ±0.02% ±0.04% PM924 24VDC ±12VDC ±230mA 25mA 0.34A 24mA ±0.02% ±0.05% A PM971 24VDC ±15VDC ±190mA 30mA 0.35A 25mA ±0.02% ±0.05% B PM972 48VDC 5VDC 1000mA 13mA 0.16A 22mA ±0.02% ±0.04% PM941 48VDC ±12VDC ±230mA 14mA 0.17A 24mA ±0.02% ±0.05% PM991 Notes 1 2 REGULATION Figures are peak-to-peak. Alternate pin-out versions, if available, are designated by the suffixes shown. For example, model PM901 is available in two alternate pin-out versions, i.e. PM901A and PM901B. See case drawings below. Fixed frequency design provides for easier input filtering and better noise performance. Short circuit protection is achieved using a thermal limit at 130°C max. An extended short circuit of >8 hours will affect the units reliability. Alternate Pin Configuration - Suffix A 2.00 (50.8) 0.15 (3.81) 60% FL 80% FL 100% FL 5V 4.4 to 6.5V 4.5 to 6.0V 4.65 to 5.5V 12V 10.56 to 15.6V 10.8 to 14.4V 11.16 to 13.2V 24V 21.12 to 31.2V 21.6 to 28.8V 22.32 to 26.4V 48V 42.24 to 62.4V 43.2 to 57.6V 44.64 to 52.8V CASE G Standard Pin Configuration 0.50 (12.7) COM/NC - IN 0.40 (10.2) MAX 2.00 (50.8) 0.30 (7.5) BOTTOM VIEW 0.80 (20.3) 0.22 (5.6) MIN. 0.60 (15.2) 0.50 (12.7) - OUT 0.02 (0.5) DIA. ALL DIMENSIONS IN INCHES (mm) 2.00 (50.8) 0.15 0.22 (3.8) (5.6) 0.15 MIN (3.8) 1.70 (43.2) + OUT 2.00 (50.8) 0.40 (10.2) MAX. 0.60 (15.2) 0.90 (22.9) 0.15 (3.8) MIN. Alternate Pin Configuration-Suffix B + IN PM962 INPUT VOLTAGE + OUT 2.00 (50.8) 0.175 (4.4) B 0.20 (5.1) + IN 0.15 (3.81) PM901 0.40 (10.2) MAX. 0.10 (2.5) 1.80 (45.7) A, B + IN NO PIN* 0.40 (10.2) COM - IN 0.20 (5.1) 0.40 (10.2) - OUT BOTTOM VIEW 0.04 (1.0) DIA + OUT ALL DIMENSIONS IN INCHES (mm) 2.00 (50.8) 0.85 (21.6) 1.65 (41.9) * On single output models this pin is either not present or should not be connected. COM/NC* 0.85 (21.6) BOTTOM VIEW DS_PM900_19980401.PDF - IN - OUT 0.04 (1.0) DIA. ALL DIMENSIONS IN INCHES (mm) http://www.artesyn.com PAGE 2