SDB130B Semiconductor Schottky Barrier Diode Applications • Portable equipment battery applications • SMPS applications Features • • • • Low switching loss High reliability Very low reverse current: IR=0.15mA Max. @ VR=30V Low forward voltage: VF=0.49V Max. @ IF=1A Ordering Information Type No. Marking SDB130B Package Code 1A3B SOD-123 Outline Dimensions unit : mm 0.99 Max. 3.30~3.70 1.50~1.70 2.60~2.80 1 2 CATHODE MARK 0.22 Max. 0.70~0.80 2 KSD-D6B002-001 1 PIN Connections 1. Anode 2. Cathode 1 SDB130B Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Peak reverse voltage VRM 30 V Reverse voltage VR 30 V Forward current IF 1.0 A IFSM 30 A TJ 150 °C Tstg -55~150 °C Peak surge forward current (Non-repetitive 60Hz sine wave) Junction temperature Storage temperature range Electrical Characteristics Characteristic (Ta=25°C) Symbol Forward voltage VF 1) Reverse current Test Condition Min. Typ. Max. Unit IF=1A - - 0.49 V IR VR=30V - - 150 µA Total capacitance CT VR=10V, f=1MHZ - 70 - pF Thermal resistance Rth Junction to ambient 2) - - 140 °C/W 1) Pulse test : tP≤380 ㎲, Duty cycle≤2% 2) Device mounted on glass epoxy PCB (recommanderable minimum solder land) ※ Recommend PCB solder land [Unit: mm] KSD-D6B002-001 2 SDB130B Electrical Characteristic Curves Fig. 2 IR - VR ㎂ Fig. 1 IF - VF Fig. 3 CT - VR The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D6B002-001 3