SDB2060PI Semiconductor Schottky Rectifier Applications • Switching mode power supply application • Converter & chopper application Features • Low forward voltage: VFM=0.65V max. • Low reverse current: IRRM=1.5mA max. @ VR=60V • Low switching loss Ordering Information Type No. Marking SDB2060PI Package Code SDB2060PI TO-220F-3L Outline Dimensions unit : mm 2.60~3.00 3.46 Typ. 9.10~9.30 Φ3.05~3.35 1.07 Min. 0.90 Max. 0.60 Max. 2.54 Typ. 2.54 Typ. 2 3 0.60 Max. 2.70 Max. 1 4.70 Max. 15.40~15.80 12.40~13.00 12.20~12.60 9.80~10.20 KSD-D0O006-001 1 SDB2060PI Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Repetitive peak reverse voltage VRRM 60 V Average rectified output current IO 20 A Peak surge forward current (Non-repetitive 60Hz sine wave) IFSM 120 A TJ 150 °C Tstg -55 ~ 150 °C Junction temperature Storage temperature range Electrical Characteristics Characteristic Peak forward voltage Repetitive peak reverse current Total capacitance Thermal resistance (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit VFM 1), 2) IF=10A - 0.61 0.65 V IRRM 1) VR=60V - - 1.5 mA VR=10V, f=1.0MHz - 400 - pF Junction to ambient - - 62.5 Junction to case - - 4.0 CT 1) Rth °C/W 1) Per each unit 2) Pulse test : tP≤380 ㎲, Duty cycle≤2% KSD-D0O006-001 2 SDB2060PI Electrical Characteristic Curves Fig. 1 IO - VF Fig. 2 IR - VR Fig. 3 CT - VR The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D0O006-001 3