SHE123AF / SHE123AF(B) Semiconductor High Efficiency LED Lamp Features • Colorless transparency lens type • φ5mm(T-13/4) all plastic mold type • Super luminosity Application • Traffic Signal • Message Board Outline Dimensions unit : mm STRAIGHT TYPE STOPPER TYPE : (B) 4.80~5.20 4.80~5.20 8.40~8.80 0.60~1.00 8.40~8.80 0.60~1.00 3.00~4.00 0.50 Typ. 0.50 Typ. 25.00 Min. 25.00 Min. 1.00 Min. 1.00 Min. 2.54 Typ. 2.54 Typ. 1 2 5.60~6.00 1 2 5.60~6.00 PIN Connections 1. Anode 2. Cathode KSD-O3B002-000 1 SHE123AF / SHE123AF(B) Absolute Maximum Ratings Characteristic (Ta=25oC) Symbol Rating Unit Power dissipation PD 105 mW Forward current IF 40 mA IFP 65 mA Reverse voltage VR 4 V Operating temperature range Topr -20∼85 ℃ Storage temperature range Tstg -30∼100 ℃ 1 * Peak forward current 2 * Soldering temperature Tsol 260℃ for 10 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical / Optical Characteristics Characteristic (Ta=25oC) Symbol Test Condition Min. Typ. VF IF= 20mA - 2.1 2.6 V IV IF= 20mA 2640 - 8910 mcd IF= 20mA 615 620 625 nm Spectrum bandwidth λD ∆λ IF= 20mA - 30 - nm Reverse current IR VR=4V - - 10 uA θ1/2 IF= 20mA - ±15 - deg Forward voltage 4 * Luminous intensity Dominant wavelength 3 * Half angle Max. Unit *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous intensity maximum tolerance for each grade classification limit is ±18% *4. Luminous Intensity Classification T1 T2 U1 U2 V1 V2 2640~3400 3400~3960 3960~4900 4900~5940 5940~7400 7400~8910 KSD-O3B002-000 2 SHE123AF / SHE123AF(B) Characteristic Diagrams Fig.2 2IVI-VIF- IF Fig. Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 1 IF - VF Forward Forward Voltage VF [V] Fig. 3 IF – Ta Current IF [mA] Forward Relative Intensity [%] Current IF [mA] Fig.4 Spectrum Distribution Wavelength λ [nm] Ambient Temperature Ta [℃] Fig. 5 Radiation Diagram Relative Luminous Intensity [%] KSD-O3B002-000 3 SHE123AF / SHE123AF(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O3B002-000 4