SHE164MC(B) Semiconductor High Efficiency LED Lamp Features • Green Colored transparency lens type • φ5mm(T-13/4) all plastic mold type • Super luminosity no flange type Application • Message boards Outline Dimensions unit : mm 4.80~5.20 7.60~8.00 0 8 . 4 ~ 0 8 . 3 n i M 0 0 . 5 2 0.50 Typ. 1.00 Min. 2.54 Typ. 1 2 5.60~6.00 PIN Connections 1. Anode 2. Cathode KSD-O3F002-000 1 SHE164MC(B) Absolute Maximum Ratings (Ta=25oC) Characteristic Symbol Rating Unit Power dissipation PD 100 mW Forward current IF 40 mA IFP 65 mA Reverse voltage VR 4 V Operating temperature range Topr -20∼85 ℃ Storage temperature range Tstg -30∼100 ℃ 1 * Peak forward current 2 * Soldering temperature Tsol 260℃ for 10 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Keep the distance more than 2.0mm from PCB to the bottom of LED package Electrical / Optical Characteristics Characteristic (Ta=25oC) Symbol Test Condition Forward voltage VF IF= 20mA - 2.1 2.5 V *4Luminous intensity IV IF= 20mA 155 - 520 mcd Peak wavelength λP ∆λ IR IF= 20mA - 570 - nm IF= 20mA - 30 - nm VR=4V - - 10 uA θ1/2 IF= 20mA - ±20 - deg Spectrum bandwidth Reverse current 3 * Half angle Min. Typ. Max. Unit *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity *4. Luminous intensity maximum tolerance for each grade classification limit is ±18% *4. Luminous Intensity Classification M N O 155~230 230~350 350~520 KSD-O3F002-000 2 SHE164MC(B) Characteristic Diagrams Fig. 2 IV - IF Luminous Intensity Iv [mcd] Forward Current IF [mA] Fig. 1 IF - VF Forward Voltage VF [V] Forward Fig. 3 IF – Ta Current IF [mA] Forward Relative Intensity [%] Current IF [mA] Fig.4 Spectrum Distribution Wavelength λ [nm] Ambient Temperature Ta [℃] Fig. 5 Radiation Diagram Relative Luminous Intensity [%] KSD-O3F002-000 3 SHE164MC(B) The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O3F002-000 4