AUK SHE155AE

SHE155AE(B)
Semiconductor
Oval Type High Efficiency LED Lamp
Features
•
•
•
•
•
•
•
•
Red Colored diffusion lens type
Ellipse type(X=5.2mm, Y=3.8mm)
Super luminosity
Flangeless package
High power LEDs
Oval shape
Lens Color : Red(Diffusion Type)
Half Angle(2 θ½) : 110˚ / 40˚ )
Application
• Full color displays
• Message boards
• Variable message signs(VMS)
Outline Dimensions
unit : mm
3.60~4.00
5.00~5.40
6.80~7.20
1.20 Min.
0.55 Max.
22.00 Min.
1.00 Min.
2.54 Typ.
0.55 Max.
1.27 Typ.
3.30~4.30
PIN Connections
1. Anode
2. Cathode
KSD-O3E001-000
1
SHE155AE(B)
Absolute Maximum Ratings
( Ta = 25℃)
Characteristic
Symbol
Rating
Unit
Power dissipation
PD
100
mW
Forward current
IF
40
mA
IFP
50
mA
Reverse voltage
VR
4
V
Operating temperature range
Topr
-20∼85
℃
Storage temperature range
Tstg
-30∼100
℃
1
* Peak forward current
2
* Soldering temperature
Tsol
*1.Duty ratio = 1/16, Pulse width = 0.1ms
260℃ for 10 seconds
*2.Keep the distance more than 2.0mm from PCB to the bottom of LED package
Electrical / Optical Characteristics
Characteristic
( Ta = 25℃)
Symbol
Test Condition
Forward voltage
VF
IF= 20mA
-
2.1
2.5
V
*4Luminous intensity
IV
IF= 20mA
155
-
700
mcd
λD
∆λ
IR
IF= 20mA
615
622
630
nm
IF= 20mA
-
17
-
nm
VR=4V
-
-
10
uA
IF= 20mA
-
±55
±20
-
deg
Dominant wavelength
Spectrum bandwidth
Reverse current
*3Half angle
θ1/2
X
Y
Min. Typ. Max.
Unit
*3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity
*4. Luminous intensity maximum tolerance for each grade classification limit is ±18%
*4. Luminous Intensity Classification
M
N
O
P
155~230
230~350
350~520
520~700
KSD-O3E001-000
2
SHE155AE(B)
Characteristic Diagrams
Fig. 1 IF - VF
Luminous Intensity Iv [mcd]
Forward Current IF [mA]
Fig. 2 IV - IF
Forward
Forward Voltage VF [V]
Fig. 3 IF – Ta
Current IF [mA]
Forward
Relative Intensity [%]
Current IF [mA]
Fig.4 Spectrum Distribution
Wavelength λ [nm]
Ambient Temperature Ta [℃]
Fig. 5-1 Radiation Diagram(X)
Fig. 5-2 Radiation Diagram(Y)
Relative Luminous Intensity Iv [%]
KSD-O3E001-000
Relative Luminous Intensity Iv [%]
3
SHE155AE(B)
The AUK Corp. products are intended for the use as components in general electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.). AUK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
KSD-O3E001-000
4