STC8050N Semiconductor NPN Silicon Transistor Descriptions • High current application • Radio in class B push-pull operation Feature • Complementary pair with STA8550N Ordering Information Type NO. Marking STC8050N STC8050 Package Code TO-92N Outline Dimensions unit : mm 4.20~4.40 4.20~4.40 2.25 Max. 2.14 Typ. 13.50~14.50 0.52 Max. 0.90 Max. 1.27 Typ. 1 2 3 0.40 Max. 3.09~3.29 3.55 Typ PIN Connections 1. Emitter 2. Base 3. Collector KSD-T0C007-001 1 STC8050N Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO 30 V Collector-emitter voltage VCEO 25 V Emitter-base voltage VEBO 6 V Collector current IC 800 mA Emitter current IE -800 mA Collector power dissipation PC 500 mW Junction temperature TJ 150 °C Tstg -55~150 °C Storage temperature range Electrical Characteristics (Ta=25°C) Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=1mA, IB=0 25 - - V Collector cut-off current ICBO VCB=30V, IE=0 - - 50 nA Emitter cut-off current IEBO VEB=6V, IC=0 - - 50 nA DC current gain hFE* VCE=1V, IC=50mA 85 - 300 - IC=500mA, IB=50mA - - 0.5 V VCE=1V, IC=500mA - 0.85 1.2 V VCE=5V, IC=10mA - 180 - MHz VCB=10V, IE=0 - 19 - pF Collector-emitter saturation voltage VCE(sat) Base-emitter voltage VBE Transition frequency fT Collector output capacitance * : hFE Rank / Cob Test Condition Min. Typ. Max. Unit B : 85~160, C : 120~200, D : 160~300 KSD-T0C007-001 2 STC8050N Electrical Characteristic Curves Fig. 1 Pc - Ta Fig. 2 IC - VBE Fig. 3 IC - VCE Fig. 4 VCE(SAT) - IC Fig. 6 hFE - IC Fig. 5 hFE - IC KSD-T0C007-001 3 STC8050N The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0C007-001 4