STN2907AEF Semiconductor PNP Silicon Transistor Descriptions • General purpose application • Switching application Features • Large collector current • Low collector saturation voltage Ordering Information Type NO. Marking Package Code STN2907AEF GT SOT-523F Outline Dimensions unit : mm 1.50~1.70 0.35 Max. 0.78~0.98 1.00 Typ. 1.50~1.70 1 3 KSD-T5E002-000 0.16 Max. 0.10 Max. 0.63~0.73 2 PIN Connections 1. Base 2. Emitter 3. Collector 1 STN2907AEF Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Collector-Base voltage VCBO -55 V Collector-Emitter voltage VCEO -50 V Emitter-Base voltage VEBO -5 V IC -600 mA PC* 150 mW Tj 150 °C Tstg -55~150 °C Collector current Collector Power dissipation Junction temperature Storage temperature range * : Package mounted on 99.5% Alumina 10×8×0.1mm. Electrical Characteristics (Ta=25°C) Characteristic Symbol Collector-Emitter breakdown voltage BVCEO IC=-10mA, IB=0 -50 - - V Collector cut-off current ICBO VCB=-55V, IE=0 - - -10 nA Emitter cut-off current IEBO VEB=-5V, IE=0 - - -10 nA DC current gain hFE VCE=-10V, IC=-10mA 75 - - - - - -0.4 V 250 - - MHz - 6.0 - pF Collector-Emitter saturation voltage Transition frequency Collector output capacitance VCE(sat) fT Cob Test Condition IC=-150mA, IB=-15mA VCE=-5V, IC=-20mA VCB=-10V, IE=0, f=1MHz KSD-T5E002-000 Min. Typ. Max. Unit 2 STN2907AEF Electrical Characteristic Curves Fig. 1 PC - Ta Fig. 2 IC - VBE Fig. 3 I C - VCE Fig. 4 VCE(sat) - IC Fig. 5 hFE - IC Fig. 6 hFE - IC KSD-T5E002-000 3 STN2907AEF The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5E002-000 4