STC9013N Semiconductor Epitaxial planar NPN silicon transistor Descriptions • General purpose application • Switching application Features • Excellent hFE linearity • Complementary pair with STA9012N Ordering Information Type NO. Marking STC9013N Package Code STC9013 TO-92N Outline Dimensions unit : mm 4.20~4.40 4.20~4.40 2.25 Max. 2.14 Typ. 13.50~14.50 0.52 Max. 0.90 Max. 1.27 Typ. 1 2 3 0.40 Max. 3.09~3.29 3.55 Typ PIN Connections 1. Emitter 2. Base 3. Collector KSD-T0C010-001 1 STC9013N Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Collector-base voltage VCBO 40 V Collector-emitter voltage VCEO 30 V Emitter-base voltage VEBO 5 V Collector current IC 500 mA Collector power dissipation PC 500 mW Junction temperature TJ 150 °C Tstg -55~150 °C Storage temperature range Electrical Characteristics (Ta=25°C) Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=1mA, IB=0 30 - - V Collector cut-off current ICBO VCB=40, IE=0 - - 0.1 µA Emitter cut-off current IEBO VEB=5V, IC=0 - - 0.1 µA 96 - 246 - IC=100mA, IB=10mA - 0.1 0.25 V VCE=1V, IC=100mA - 0.75 1.0 V VCE=6V, IC=20mA - 200 - MHz VCB=6V, IE=0, f=1MHz - 7.0 - pF DC current gain Collector-emitter saturation voltage * hFE VCE(sat) Base-emitter voltage VBE Transition frequency fT Collector output capacitance * : hFE Rank / Cob Test Condition VCE=1V, IC=50mA Min. Typ. Max. Unit F : 96~135, G : 118~166, H : 144~202, I : 176~246. KSD-T0C010-001 2 STC9013N Electrical Characteristic Curves Fig. 1 Pc - Ta Fig. 2 IC - VBE Fig. 3 IC - VCE Fig. 4 VCE(SAT) - IC Fig. 5 hFE - IC Fig. 6 hFE - KSD-T0C010-001 IC 3 STC9013N The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T0C010-001 4