SW1314E-H Semiconductor White Chip LED Features • • • • 1.6mm(L)×0.8mm small size surface mount type Thin package of 0.4mm(H) thickness Transparent clear lens optic Low power consumption type chip LED • E ; ESD Protected (±2.0kv, 3 times @100pF, 1.5kΩ) Applications • • • • LCD backlighting Keypad backlighting Symbol backlighting Front panel indicator lamp Outline Dimensions unit : mm KSD-O8F005-001 1 SW1314E-H Absolute Maximum Ratings (Ta=25oC) Characteristic Symbol Rating Unit Power dissipation PD 80 mW Forward current IF 20 mA IFP 50 mA Operating temperature range Topr -25∼80 ℃ Storage temperature range Tstg -30∼100 ℃ 1 * Peak forward current 2 * Soldering temperature Tsol 240℃ for 10 seconds *1. Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended reflow soldering temperature profile - Preheating 150℃ to 185℃ within 120 seconds soldering 240℃ within 10 seconds Gradual cooling (Avoid quenching) Temp (℃) Peak Temp max. 240℃ 240 Preheating area 150~185℃, 90±30sec max. 10sec Solder area 220℃, max. 60sec 185 150 max. 3℃/sec max. -6℃/sec max. 4℃/sec Time from 25℃ to Peak Temperature max. 6min 25 0 60 150 180 240 Time (sec) Electrical / Optical Characteristics Characteristic (Ta=25oC) Symbol Test Condition Min Typ Forward voltage VF IF= 5mA 2.6 - 3.4 V *3Luminous intensity IV IF= 5mA 15 - 75 mcd 0.21 - 0.33 - 0.18 - 0.36 - - ±65 - - ±70 - X *4Chromaticity coordinates *5Half angle IF= 5mA Y θ1/2 X Y IF= 5mA KSD-O8F005-001 Max Unit deg 2 SW1314E-H *4. Luminous intensity maximum tolerance for each grade classification limit is ±18% (The test result of IF=5mA is only for reference) *5. CIE Coordinates bin limits will have ±0.02 tolerance *6. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity ● VF / IV Grade Classification (Ta=25℃) Test Condition @IF = 5mA Forward Voltage [V] Luminous Intensity [mcd] 1 : 2.6~2.8 A : 15~22 2 : 2.8~3.0 B : 22~33 3 : 3.0~3.2 C : 33~50 4 : 3.2~3.4 D : 50~75 (Do not use to combine grade classification. It must be used separately grade classification) KSD-O8F005-001 3 SW1314E-H Characteristic Diagrams Fig. 2 IV - IF Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 1 IF - VF Forward Current IF [mA] Forward Voltage VF [V] Fig.4 Spectrum Distribution Forward Relative Intensity [%] Current IF [mA] Fig. 3 IF – Ta Wavelength λ [nm] Ambient Temperature Ta [℃] Fig. 5-1 Radiation Diagram(X) Fig. 5-2 Radiation Diagram(Y) Relative Luminous Intensity Iv [%] KSD-O8F005-001 Relative Luminous Intensity Iv [%] 4 SW1314E-H ♦ CIE 1931 UCS Diagram 0.9 520 530 0.8 510 0.36 540 0.31 CIE Coordinate Y CIE Coordinate Y 0.7 c b 0.26 a 0.21 550 0.6 500 0.5 580 590 495 0.4 600 0.3 650 490 830 0.2 0.16 480 0.1 0.2 0.22 0.24 0.26 0.28 0.3 0.32 0.34 470 450 0 CIE Coordinate X 0 0.1 380 0.2 0.3 0.4 0.5 0.6 0.7 0.8 CIE Coordinate X ● CIE Coordinates Grade Classification (Ta=25℃, IF=5mA) Color Bin a CIE Coodinates X Y 0.21 0.24 0.21 0.18 0.25 0.22 0.25 0.28 Color Bin b CIE Coodinates X Y 0.25 0.28 0.25 0.22 0.29 0.26 0.29 0.32 KSD-O8F005-001 Color Bin c CIE Coodinates X Y 0.29 0.32 0.29 0.26 0.33 0.30 0.33 0.36 5 SW1314E-H The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-O8F005-001 6