ASMT-SWBM-Nxxxx Surface Mount LED Indicator Data Sheet Description Features The Long-Life White PLCC-4 SMT LEDs is the latest extension to our White PLCC-4 packages where besides having higher flux output, the Long-Life White PLCC-4 is designed to work under a wide range of environment condition, with reliable and stable performance. The structure and materials used for Long-Life White PLCC-4 enable the packages to endure minimal degradation and hence consistent performance throughout the product life time. Moreover, the Long-Life White PLCC-4 SMT LEDs is a 8-binned product for color, an enhance feature from the previous PLCC-4 white who is binned with 6 color binning only. These tigher color binning will ensure better color grouping with better uniformity. • Industry standard PLCC-4 The Long-Life White PLCC-4 SMT LEDs is suitable to be used in Interior Automotive application, Electronics Signs and Signals application. Besides that, the super wide viewing angle at 120° makes these LEDs ideally suited for instrument cluster panel, push button, or general backlighting in automotive interior, office equipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these super high brightness LEDs can be used in localized area ambience lighting in applications such as vanity mirror light, cabin light, and car door puddle light. The white color backlighting is suitable to backlight color LCD screens in applications such as GPS (global positioning system) screen in cars. • JEDEC MSL 2a To facilitate easy pick and place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin, to provide close uniformity. These LEDs are compatible with IR solder reflow process. • High reliability LED package • Long Life, up to 50,000 hours at 25°C • High brightness using InGaN dice technologies • High optical efficiency • Super wide viewing angle at 120° • Tight white color binning – 8 bins • Available is 8mm carrier tape on 7-inch reel • Stabile & Consistent performance with minimum degradation with Silicone Encapsulation Applications • Interior & exterior automotive - Instrument panel backlighting - Central console backlighting - Navigation and audio system backlighting - Dome/Map lighting - Push button backlighting - Number plate illumination - Rear reverse lamp indicator • Electronic signs and signals - Decorative lighting • Office automation, home appliances, industrial equipment - Front panel backlighting - Push button backlighting CAUTION: ASMT-SWBM-Nxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details. Package Drawing Table 1. Device Selection Guide Color Part Number Min. IV (mcd) Typ. IV (mcd) Max. IV (mcd) Test Current (mA) Dice Technology White ASMT-SWBM-NU803 560.00 1100.00 1400.00 30 InGaN V V V Notes: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis. 2. IV tolerance ±12% Part Numbering System A S M T – S X1 B M – NX2 X 3 X 4 X 5 Packaging Option Color Bin Selection Intensity Bin Limit Intensity Bin Selection LED Chip Color Table 2. Absolute Maximum Ratings (TA = 25 °C) Parameters ASMT-SWBM-Nxxxx DC Forward Current [1] 50 mA Peak Forward Current [2] 300 mA Power Dissipation 215 mW Reverse Voltage 4V Junction Temperature 125 °C Operating Temperature - 40 °C to + 110 °C Storage Temperature - 40 °C to + 110°C Notes: 1. Derate linearly as shown in Figure 4. 2. Duty Factor = 0.5%, Frequency = 500Hz. Table 3. Optical Characteristics (TA = 25 °C) Color Part Number Dice Technology White ASMT-SWBM-Nxxxx InGaN Typical Chromaticity Coordinates[1] Viewing Angle 2q½ [2] (Degrees) Luminous Efficacy hV [3] (lm/W) Luminous Efficiency he (lm/W) Luminous Intensity / Total Flux [4, 5] IV (mcd) / φV (lm) x y Typ. Typ. Typ. Typ 0.318 0.318 120 274 27 0.37 Notes: 1. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. 2. q½ is the off-axis angle where the luminous intensity is ½ the peak intensity. 3. Radiant intensity, Ie in watts / steradian, may be calculated from the equation Ie = IV / hV, where IV is the luminous intensity in candelas and hV is the luminous efficacy in lumens / watt. 4. φV is the total luminous flux output as measured with an integrating sphere after the device has stabilized. 5. Flux tested at mono pulse conditions. Table 4. Electrical Characteristics (TA = 25 °C) Forward Voltage VF (Volts) @ IF = 30 mA [1] Reverse Voltage VR @ 10µA Part Number Typ. Max. Min. Thermal Resistance RqJ-P (°C/W) ASMT-SWBM-Nxxxx 3.5 4.35 4 110 Notes: 1. Tolerance = ±0.1V Table 5. Targeted Mean Lifetime Conditions Mean Luminous Maintenance (L50) Unit IF = 25mA TA = 85°C 25,000 Operating hours IF = 25mA TA = 25°C 50,000 Operating hours Notes: 1. The typical data or calculated correlations can only reflect statistical figure, hence can only be used for reference only 2. All data shown based on Thermal Resistance RθJA=300°C/W. 3. Due to technical improvement,Avago technologies reserved right to change the typical data without any further notice. 1.0 0.9 RELATIVE INTENSITY 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 430 480 530 580 630 680 730 780 WAVELENGTH - nm Figure 1. Relative Intensity Vs. Wavelength 1.6 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 30 mA) FORWARD CURRENT - mA 60 50 40 30 20 10 1.2 0.8 0.4 0 0 2 4 0 6 FORWARD VOLTAGE - V MAXIMUM FORWARD CURRENT - mA MAXIMUM FORWARD CURRENT - mA 60 60 50 40 30 20 10 0 20 40 60 80 100 AMBIENT TEMPERATURE - ˚C Figure 4a. Maximum Forward Current Vs. Ambient Temperature. Derated Based on TJMAX = 125°C, RqJA=300°C/W 10 20 30 40 50 55 DC FORWARD CURRENT - mA Figure 3. Relative Intensity Vs. Forward Current Figure 2. Forward Current Vs. Forward Voltage 0 0 120 50 40 30 20 10 0 0 20 40 60 80 100 SOLDER POINT TEMPERATURE (˚C) Figure 4b. Maximum forward current vs. solder point temperature. Derated Based on TJMAX = 125°C, RqJP=110°C/W 120 1 NORMALIZED INTENSITY 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -90 -60 -30 0 30 60 90 ANGULAR DISPLACEMENT - DEGREES Figure 5. Radiation Pattern D Note: Diameter "D" should be smaller than 2.2mm Figure 6. Recommended Pick and Place Nozzle Size Figure 7. Recommended Pb-free Reflow Soldering Profile Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components Figure 8. Recommended Soldering Pad Pattern Figure 9. Tape Leader and Trailer Dimensions Figure 10. Tape Dimensions Figure 11. Reeling Orientation This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - Unopen moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. - It is not recommended to open the MBB prior to assembly (e.g. for IQC). B. Control after opening the MBB - The humidity indicator card (HIC) shall be read immediately upon opening of MBB. - The LEDs must be kept at <30°C / 60%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours. C. Control for unfinished reel - For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH. D. Control of assembled boards - If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of 672 hours. E. Baking is required if: - “10%” or “15%” HIC indicator turns pink. - The LEDs are exposed to condition of >30°C / 60% RH at any time. - The LEDs floor life exceeded 672 hours. Recommended baking condition: 60±5°C for 20 hours. Intensity Bin Select (X2X3) Color Bin Select (X4) Individual reel will contain parts from one half bin only Individual reel will contain parts from one full bin only. X2 X7 Min IV Bin 0 Full Distribution X3 A 1 and 2 only 0 Full Distribution B 2 and 3 only 2 2 half bins starting from X21 C 3 and 4 only 3 3 half bins starting from X21 D 4 and 5 only 4 4 half bins starting from X21 E 5 and 6 only 5 5 half bins starting from X21 F 6 and 7 only 6 2 half bins starting from X22 G 1, 2 and 3 only 7 3 half bins starting from X22 H 2, 3 and 4 only 8 4 half bins starting from X22 J 3, 4 and 5 only 9 5 half bins starting from X22 K 4, 5 and 6 only L 5, 6 and 7 only M 1, 2, 3 and 4 only N 2, 3, 4 and 5 only P 3, 4, 5 and 6 only Intensity Bin Limits Bin ID Min. (mcd) Max. (mcd) Q 4, 5, 6 and 7 only N1 28.50 35.50 R 1, 2, 3, 4 and 5 only N2 35.50 45.00 S 2, 3, 4, 5 and 6 only P1 45.00 56.00 T 3, 4, 5, 6, and 7 only P2 56.00 71.50 U 1, 2, 3, 4, 5 and 6 only Q1 71.50 90.00 V 2, 3, 4, 5, 6 and 7 only Q2 90.00 112.50 Z Special Color Bin R1 112.50 140.00 R2 140.00 180.00 S1 180.00 224.00 S2 224.00 285.00 T1 285.00 355.00 T2 355.00 450.00 U1 450.00 560.00 U2 560.00 715.00 V1 715.00 900.00 V2 900.00 1125.00 W1 1125.00 1400.00 W2 1400.00 1800.00 Tolerance of each bin limit = ± 12% Color Bin Limits Bin ID 1 2 3 4 5 6 7 8 Limits (Chromaticity Coordinates) x 0.296 0.291 0.310 0.313 y 0.259 0.268 0.297 0.284 x 0.291 0.285 0.307 0.310 y 0.268 0.279 0.312 0.297 x 0.313 0.310 0.330 0.330 y 0.284 0.297 0.330 0.310 x 0.310 0.307 0.330 0.330 y 0.297 0.312 0.347 0.330 x 0.330 0.330 0.338 0.352 y 0.310 0.330 0.342 0.344 x 0.330 0.330 0.347 0.345 y 0.330 0.347 0.371 0.352 x 0.352 0.338 0.364 0.360 y 0.344 0.342 0.380 0.357 x 0.345 0.347 0.367 0.364 y 0.352 0.371 0.401 0.380 Tolerance of each bin limit = ±0.02. Packaging Option (X5) Option Test Current Package Type Reel Size 3 30 mA Top Mount 7 inch VF Bin Limits Bin ID Min. Max. S3 3.20 3.80 S4 3.80 4.35 Tolerance of each bin limit = ±0.1V Y-COORDINATE Color Coordinates Chart X-COORDINATE Handling Precaution The encapsulation material of the product is made of silicone for better reliability of the product. As silicone is a soft material, please do not press on the silicone or poke a sharp object onto the silicone. These might damage the product and cause premature failure. During assembly of handling, the unit should b e held on the body only. Please refer to Avago Application Note AN 5288 for detail information. For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0443EN AV02-0443EN - July 3, 2007