defining a degree of excellence TOKENRINGNETWORKING COMPONENTS 960040A • Designed for use with Texas Instruments TIC380C30/C60 token ring transceivers • Space efficient SIP packaging for multi-port hub repeater and switch applications • Complies with IEEE 802.5 standards • Supports STP 150 ohm or UTP 100 ohm cable ELECTRICALS AT 25ºC Turns Ratio Insertion Loss (dB) Max 1-8MHz 16MHz 24MHz 0556-5841-01 1.22:1 -0.6 -0.8 -1.9 -7 -25 -30 -25 -14/-23 -12/-20 -8/-17 -45 -30 -25 -50 -40 -35 0556-5841-02 1.22:1 -0.6 -0.8 -1.9 -7 -25 -30 -25 -14/-23 -12/-20 -8/-17 N/A N/A N/A N/A N/A N/A N/A N/A -50 -40 -35 0556-5841-06 1.22:1 -0.5 -0.8 -1.7 -7 -25 -18 -25 -14/-23 -12/-20 -8/-17 -45 -30 -30 -20 -50 -40 -30 -25 -50 -40 -35 0556-5841-07 1.22:1 -0.6 -0.8 -1.9 -7 -25 -25 -25 -14/-23 -12/-20 -8/-17 -45 -30 -30 -20 -50 -40 -30 -25 -50 -40 -35 Part No. Attenuation Return Loss (dB) Min Common to Common Common to Dif Crosstalk (dB) Min TX/RX Mode Rej (dB) Min Mode Rej (dB) Min (dB) Min 33MHz 36MHz 44MHz 100MHz 1-6MHz 6-17MHz 17-24MHz 5MHz 20MHz 70MHz 200MHz 1-4MHz 10MHz 30MHz 100MHz 1-4MHz 10-16MHz 25MHz -30 -20 -50 -40 -30 SCHEMATICS 0556-5841-01 0556-5841-07 0556-5841-02 0556-5841-06 MECHANICALS 0556-5841-01 0556-5841-02 0556-5841-07 0556-5841-06 Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Website: http://www.belfuse.com defining a degree of excellence 960040A TOKENRINGNETWORKING COMPONENTS APPLICATION CIRCUIT APPLICATION NOTES • Bel has created these products for use with token ring 4/16 Mbps chipsets developed by Texas Instruments in 150 ohm STP and 100 ohm UTP media applications; however, both the 150 ohm and 100 ohm connections cannot be used simultaneously. The Bel modules provide internal filter networks on the transmit channels, in addition to both transmit and receive high voltage isolation transformers, plus common mode chokes on both channels for EMI and noise suppression. • Suppression of board induced noise can be achieved with precision layout instructions, along with careful consideration of the selection and placement of discrete components for the interface circuit. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366