defining a degree of excellence 10BASE-T NETWORK COMPONENTS FILTER MODULES 960003B • Complies with IEEE 802.3i 1993 specifications for 10Base-T • Improved EMI characteristics for FCC and CISPR "B" performance • Designed to function with a variety of AMD 10Base-T transceivers • Includes pre-emphasis and impedance matching resistor network • Through-hole and SMT packaging • 2000 Vrms isolation ELECTRICALS AT 25ºC Part No. Insertion Loss (dB) Typ 1MHz-10MHz Attenuation (dB) Min 30MHz 50MHz 100MHz Tx Rx Tx Rx Tx Rx Return Loss (dB) Min 1MHz-10MHz Crosstalk (dB) Min 1MHz-10MHz -5.0 -5.0 -27 -16 -33 -26 -40 -30 -27 -16 -33 -26 -40 -30 -15 -15 -30 -35 0556-2006-24 S556-5999-A4 Common Mode Rej (dB) Min 10-30MHz 30-100MHz -40 -40 -30 -30 SCHEMATIC MECHANICALS 0556-2006-24 S556-5999-A4 Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Website: http://www.belfuse.com L110 defining a degree of excellence 960003B 10BASE-T NETWORK COMPONENTS FILTER MODULES APPLICATION CIRCUIT APPLICATION NOTES • Refer to Bel short form catalog for list of recommended AMD transceivers compatible for use with these parts. • Resistor values are chosen to precision match the impedance characteristics of the AMD transceiver with that of the internal filter network within magnetics module. • This part provides impedance matching, signal wave shaping, EMI and common mode noise suppression and high voltage isolation. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com L111 Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366