POWERLINE MODULES SIMPLE™ Embedded PowerPacket™ Modules FEATURES • All-in-one HomePlug™ 1.0 embedded modules based on Intellon’s advanced INT5200 single-chip powerline solution • Pin and function compatible with the previous generation INT51MX modules • Integrates all components necessary to add HomePlug functionality to any embedded system at industry’s lowest cost • Compact vertical or right-angle mounting configuration using Intellon’s SIMPLE PowerBus™ connector • Configurable for optimum performance in six foot AC/DC corded or wallplug (zero feet) applications • Operates from a single 3.3V supply • Minimum footprint • HomePlug 1.0 compliant • Simplifies development cycle, assembly and test Part Number Description 0804-5000-01 Right Angle Mounting 0804-5000-02 Vertical Mounting Bel’s series of embedded PowerPacket modules are the first members of the Single Inline Module – Power Line Enabled (SIMPLE) family. These modules are specifically designed to allow future Intellon ICs to be used without board redesign. As new baseband/AFE ICs are introduced by Intellon, pin and function compatible SIMPLE modules can be used to provide improved functionality and/or reduced cost without requiring any redesign of products using SIMPLE modules. Based on the industry leading Intellon single-chip PowerPacket transceiver, these modules integrate most of the components required in a HomePlug solution on a tiny single in-line package. This package can be easily connected into any existing embedded system via the proprietary SIMPLE PowerBus™ header instantly adding HomePlug functionality with virtually no PCB space and without the hassle of a system redesign. Each module integrates the chip, crystal, EEPROM, discrete RX filter and DC regulators into one single device. The only external components required are the PLC coupler and transient protection on the AC side of the main power supply. The host interface for any of the modules can be configured to be MII PHY, GPSI PHY or MII Host/DTE. The modules are truly the industry’s most integrated and cost effective way of adding HomePlug 1.0 functionality to any embedded networking or consumer electronics product. In Partnership with ©2004 Bel Fuse Inc. Specifications subject to change without notice. 01.15.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com POWERLINE MODULES SIMPLE™ Embedded PowerPacket™ Modules BLOCK DIAGRAM +3.3VDC Host Interface: MII/GPSI PHY or MII Host/DTE (18) Config (5) Reset LED’s (2) 3.3V Analog 3.3V Digital 1.8V 1.5V 3.3V Reg/ Filter PL Coupler/ Transient Protection TX Out/RX In (2) INT5200 BGA 6 Config EE 25MHz XTAL MECHANICAL 0804-5000-02 Vertical Mount Gain Adjust Jumpers ACLine Bel INT52MX SIMPLE PowerPacket Module �������� ������������� �������� ����� ������� � �� ����� ������ ����� ������ ����� ������ ������������� ����������� ©2004 Bel Fuse Inc. Specifications subject to change without notice. 01.15.04 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com POWERLINE MODULES SIMPLE™ Embedded PowerPacket™ Modules MECHANICAL 0804-5000-01 Right Angle Mount End View Top View 2.165 [54.99] 0.420 [10.67] 0.220 [5.59] 0.060 [1.52] 0.669 [16.99] Note: Pin 2 removed prior to fitting Side View 0.050 [1.27] 0.682 [17.32] 0.085 [2.16] 0.206 [5.23] 0.100 [2.54] ø0.020 [0.51] 0.110 [2.79] 0.018 [0.46] sq. typ 1.950 [49.53] ©2004 Bel Fuse Inc. Specifications subject to change without notice. 01.15.04 Intellon, PowerPacket, SIMPLE and SIMPLE PowerBus are registered trademarks of Intellon Corportation. CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Stewart Connector 45/46 Riverside Medway City Estate Rochester, Kent ME2 4DP U.K. Tel 44-1634-722890 Fax 44-1634-716677 www.belfuse.com