Integrated CPE Filter/Hybrid Solution VDSL / 10BaseS for Infineon PEB 22810/11/12/22 Chipset APC77163 ELECTRICAL SPECIFICATIONS @ 25°C Description Passband Frequency Insertion Loss max Return Loss min *VDSL Splitter/ Hybrid 138 kHz to 7.9 MHz Receive LPF 138kHz to 3.9MHz 0.8 dB 12 dB Transmit BPF 138 kHz to 7.9 MHz 0.8 dB 12 dB Stopband Frequency Attenuation min Impedance 100 ohms 4.3 MHz to 7.9 MHz 30 dB 270 ohms 40 ohms *TRANSHYBRID LOSS THROUGH VDSL SPLITTER/HYBRID IS > 15dB MIN PROVIDES 1500VRMS ISOLATION VOLTAGE. INCORPORATES XDSL CHOKE > 35dB MIN SCHEMATIC AGND�N/C� V� oi� c�� e� *POTS/ISDN� Eq� ui� p �m �e �n �t�� APC77101� 4� 0o �h �m � s� T� R� A� N� S� MI� T �� B� P� F� TX� TX� 1� 00 �o �h �m � s� TIP� VDSL� SPLITTER� RING� XFRMR� HYBRID� 2� 70 �o �h �m � s� R� E� C� E� IV �� E� LP� F� RX� RX� *PLEASE REFER TO APC77101 DATASHEET FOR APPLICATION NOTES ON POTS/ISDN SPLITTER. MECHANICAL T� op�V� iew� E� nd�V� iew� D� ev� ic� e�P� ino� ut� 43� .3 �5�+� /-�� 0.05� LINE� Rx-� Rx�+� A� PC ��771� 63� 20� .3 �5�+� /-�� 0.05� Tx-� Tx+� AGND� NC� S� ide�V� iew� R� ec� ommen� de� d�P� C� B� La� yo �u� t� 38� .8 �� 9.0�+� /-�� 0.05� 15� .8 �� NOTE: ALL TOLERANCES ARE +/- 0.010 0.25 R� ec� ommen� de� d�H� ole� S� iz� e�Ø�1.0� Pin Signal 1 AGND 2 NC 3 TX - 4 TX + 5 RX + 6 RX - 7 LINE 8 LINE 2.54� ©2003 Bel Fuse Inc. Specifications subject to change without notice. 07.17.03 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com Page 1