1206 size RoHS Compliant Type C1S C1SD1005 Surface Mount Slow Blow Chip Fuse EC1SD1005A1 Catalog Number C1S 750 Typical Cold Resistance (ohm) Volt-drop @100% In Melting I2T @10 In (Volt) max. (A2 Sec) 750mA 0.420 0.442 0.037 0.40 Ampere Rating C1S 1 Electrical Characteristics Testing current (UL STD. 248-14) Minimum Maximum 100% 4 hrs N/A 200% 1 sec 120 sec 300% 0.1 sec 3 sec 800% 0.002 sec 0.05 sec 0.220 0.325 0.068 0.39 1.25A 0.215 0.363 0.11 0.54 C1S 1.5 1.5A 0.108 0.313 0.24 0.56 2A 0.098 0.250 0.44 0.60 2.5A 0.053 0.212 0.74 0.64 Safety Agency Approvals Recognized File No. E20624 C1S 2.5 C1S 3 3A 0.040 0.189 1.11 0.68 3.5A 0.031 0.173 1.58 0.74 C1S 4 4A 0.026 0.165 2.00 0.79 C1S 5 5A 0.019 0.153 3.40 0.92 C1S 3..5 rc Approvals r 1A C1S 1.25 C1S 2 Blow Time Amp range / Volt @ I.R. ability Maximum Power Dissipation (W) Consult manufacturer for other ratings Physical Specification Materials Ceramic Substrate / Printed Element 750mA - 5A / 63V @ 50A AC / DC RoHS Compliant Product RoHS Reflow Reference : JEDEC J-STD-020C (260°C, 40 sec max) RoHS Wave Soldering Compatible : (260°C, 10 sec max) Environmental Specification Shock Resistance MIL-STD-202G, Method 213B, Test Condition I (100 G’s peak for 6 milliseconds; Sawtooth Waveform) Vibration Resistance MIL-STD-202G, Method 201F (10-55 Hz, 0.06 inch, total excursion) Marking On fuse: None Label on reel: “bel”, “C1S”, “Current Rating”, “Voltage Rating”, “ Interrupting Rating”, “Appropriate Safety Logos” and “ ” for RoHS Version Packaging 5,000 fuses in 7 inches dia. reel, 8 mm wide tape, 4 mm pitch per EIA-481 (equivalent IEC-286 part 3) Salt Spray Resistance MIL-STD-202G, Method 101E, Test condition B (48 hrs) Insulation Resistance MIL-STD-202G, Method 302, Test Condition A (After Opening) 10,000 ohms minimum Solderability MIL-STD-202G, Method 208H Soldering Heat Resistance MIL-STD-202G Method 210F, Test Condition C.Top Side (260°C, 20 sec) MIL-STD-202G Method 210F, Test Condition D. Bottom Side (260°C, 10 sec) Thermal Shock Resistance MIL-STD-202G, Method 107G, Test Condition B (-65°C to +125°C) Operating Temperature -55°C to +125°C 1.52 ( 0 . 0 6 0m m+ +_0 . 1 0 m m " _0 . 0 0 4") 3 .0 (0 .1 271m m+ -+0 .1 3 m "- 0 .0 0 m 5 ") 0 .5 8 m + m (0 .0 2 3 -+ 0 .0 8 m m "- 0 .0 0 3 ") 0 .3 6 m (0 .0 1 4 " m_+ _+0 .1 5 m m 0 .0 0 6 ") C1S Protective Overglaze Element Tin Plating Nickel Barrier Silver Metalization Ceramic Substrate 1.52mm (0.06") 1.52mm (0.06") 1.78mm (0.07") 2.03mm (0.08") 1.14mm (0.045") PAD LAYOUT RECOMMENDED FOR INFRARED SOLDER 1.52mm (0.06") PAD LAYOUT RECOMMENDED FOR WAVE SOLDER Specifications subject to change without notice Mechanical Dimensions ORDERING INFORMATION SEE LAST 2 PAGES Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Website: www.belfuse.com 17 1206 size RoHS Compliant Type C1S Surface Mount Slow Blow Chip Fuse C1SC1004 (O02) - 750mA - 1A - 1.25A - 1.5A - 2A - 2.5A - 3A - 3.5A - 4A - 5A C1S - TIME CURRENT CHARACTERISTIC CURVE 10000 1000 TIME IN SECONDS 100 10 1 0.01 0.001 0.1 1 10 100 CURRENT IN AMPERES Specifications subject to change without notice 0.1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Website: www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K Tel: 44-1772-556601 Fax: 44-1772-888366 18