1206 size Type C1Q Surface Mount Very Fast-Acting Chip Fuse C1QD0600 Catalog Number C1Q 250 Electrical Characteristics (UL/CSA STD. 248-14) Testing current Blow Time Ampere Rating Melting I2T < 10 mSec Melting I2T @10 In (A2 Sec) (A2 Sec) Maximum Power Dissipation (W) 0.31 0.0018 0.0002 0.10 Typical Volt-drop Cold @100% In Resistance (ohm) (Volt) max. 250mA 0.88 C1Q 375 375mA 0.47 0.26 0.0044 0.0004 0.12 C1Q 500 500mA 0.32 0.23 0.008 0.001 0.14 C1Q 750 750mA 0.175 0.19 0.019 0.002 0.18 1A 0.119 0.17 0.035 0.004 0.21 C1Q 1 Minimum Maximum C1Q 1.25 1.25A 0.087 0.16 0.057 0.007 0.24 100% 4 hrs N/A C1Q 1.5 1.5A 0.070 0.15 0.084 0.010 0.28 200% N/A 5 sec C1Q 2 2A 0.049 0.14 0.15 0.020 0.35 300% N/A 0.2 sec C1Q 2.5 2.5A 0.038 0.14 0.25 0.034 0.43 C1Q 3 3A 0.032 0.14 0.37 0.052 0.52 C1Q 3.5 3.5A 0.028 0.14 0.53 0.076 0.62 C1Q 4 4A 0.025 0.14 0.67 0.10 0.71 C1Q 5 5A 0.021 0.15 1.10 0.17 0.96 Vßc Approvals Safety Agency Approvals V Listed File No. E20624 ß Certified File No. LR39772 Amp range / Volt @ I.R. ability 250mA -5A / 125V AC@ 100A and 63V DC@ 50A Consult manufacturer for other ratings Physical Specification Materials Ceramic Substrate / Printed Element Environmental Specification Soldering Conditions Infrared Reflow: 260°C, 20 sec max. Wave Solder: 260°C, 10 sec max. (MIL-STD-202, Method 210) Solderability: MIL-STD-202, Method 208 Shock MIL-STD-202, Method 213, Test Condition I (100 G’s peak for 6 milliseconds) Vibration MIL-STD-202, Method 201 (10-55 Hz, 0.06 inch, total excursion) Packaging 5,000 fuses in 7 inches dia. reel, 8 mm wide tape, per EIA-481 (equivalent IEC-286 part 3) Mechanical Dimensions (all in inches for reference only) 6" 5" 02 P r o t e c t i ve O ve r g l a ze Element Tin / Lead Plating N i cke l B a r r i e r S i l ve r M e t a l i z a t i o n C e ra m i c S u b s t ra t e 5" 0. Insulation Resistance MIL-STD-202, Method 302, Test Condition A (After Opening) 10,000 ohms minimum 0.0 12 0. 0. Salt Spray MIL-STD-202, Method 101, Test Condition B (48 hrs) Marking On fuse: None Label on reel: “ bel ”, “ C1Q ”, “ Current Rating ”, “ 125V; Interrupting Ratings ” & “ Vßc ” 02 " Resistance to Solder Heat MIL-STD-202, Method 210, Test Condition F (260°C, 20 sec) Thermal Shock MIL-STD-202, Method 107, Test Condition B (-65°C to +125°C) Operating Temperature -55°C to +125°C 0.06" C1Q 0.06" 0.08" 0.07" 0.045" PA D L AYO U T R E C O M M E N D E D FOR INFRARED SOLDER 0.06" PA D L AYO U T R E C O M M E N D E D F O R WAV E S O L D E R Specifications subject to change without notice Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Internet: http://www. belfuse.com 1206 size Type C1Q Surface Mount Very Fast-Acting Chip Fuse C1QC0600 - 5A - 4A - 3.5A - 3A - 2.5A - 2A - 1.5A - 1.25A - 1A - 750mA - 500mA - 375mA - 250mA C1Q - TIME CURRENT CHARACTERISTIC CURVE 10000 1000 TIME IN SECONDS 100 10 1 0.01 0.001 0.1 1 10 100 CURRENT IN AMPERES Specifications subject to change without notice 0.1 NOTE - see important information under “User Guide”on P.08 Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 Tel: 201-432-0463 FaxFax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Te l : 8 5 2 - 2 3 2 8 - 5 5 1 5 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. P r e s t o n Te c h n o l o g y M a n a g e m e n t C e n t r e Marsh Lane, Preston PR1 8U Lancashire, U.K Te l : 4 4 - 1 7 7 2 - 5 5 6 6 0 1 Fax: 44-1772-888366