COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 • Designed to reduce EMI and common mode noise • Multiple signal lines and packaging options available • Common mode attenuation from 100kHz to 500MHz • Low profile, SMT packaging rated to withstand 225° C peak IR reflow temperature • Operating temperature 0° to 70° C • Minimum interwinding breakdown voltage of 1500 Vrms ELECTRICAL SPECIFICATIONS AT 25° C Number of Lines Part Number Common Mode Attenuation dB typ OCL µH min (winding x core) 300kHz 1MHz 10MHz 30MHz DCR Ω max 50MHz 100MHz 300MHz 500MHz Surface Mount S555-5999-41 4 (4 x 1) 20 -16 -25 -37 -42 -41 -42 -34 -31 0.50 S555-5999-40 4 (4 x 1) 24 -10 -22 -30 -29 -27 -23 -10 -2 0.35 S555-5999-15 4 (2 x 2) 38 -10 -17 -29 -35 -36 -36 -23 -15 0.30 S555-0139-01 4 (2 x 2) 80 -11 -21 -30 -32 -33 -32 -20 -9 0.95 S555-5999-02 4 (2 x 2) 140 -17 -27 -40 -45 -43 -38 -22 -11 0.80 S555-6400-08 4 (4 x 1) 4700 -40 -50 -38 -28 -22 -11 -4 --- 1.00 S555-2940-00 6 (2 x 3) 80 -12 -19 -29 -30 -29 -28 -20 -12 0.20 S555-1084-00 8 (2 x 4) 24 -5 -12 -27 -32 -34 -32 -20 -11 0.30 S555-5999-39 8 (2 x 4) 350 -21 -28 -35 -29 -25 -19 -10 -4 0.20 S553-5999-D6 16 (2 x 8) 85 -17 -27 -37 -38 -36 -30 -12 -2 0.30 Through Hole 0553-3965-08 2 (2 x 1) 140 -16 -26 -38 -43 -45 -42 -24 -16 0.80 0555-3001-08 4 (2 x 2) 120 -16 -26 -39 -45 -44 -38 -20 -15 0.80 0555-6400-06 4 (4 x 1) 4700 -44 -50 -37 -27 -21 -8 --- --- 1.00 ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-1 COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 SCHEMATICS 0555-3001-08 0553-3965-08 1 4 2 3 8 7 1 2 6 3 5 4 S553-5999-D6 0555-6400-06 5 4 6 7 1 2 40 39 2 1 9 10 3 5 38 36 6 7 35 34 8 10 33 31 11 12 30 29 13 15 28 26 16 17 25 24 18 20 23 21 S555-0139-01 ©2000 Bel Fuse Inc. 5 6 4 3 7 2 8 1 Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-2 COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 SCHEMATICS S555-2940-00 S555-1084-00 S555-5999-39 1 2 16 15 1 2 16 15 3 14 4 13 4 13 5 12 5 6 12 11 7 8 10 9 7 10 8 9 S555-5999-02 S555-5999-15 S555-5999-40 S555-5999-41 1 2 8 7 3 6 4 5 1 2 3 8 7 6 4 5 S555-6400-08 10 9 1 2 7 4 6 5 ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-3 COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 MECHANICALS 0.390 [9.91] max 0553-3965-08 0.380 [9.65] max 0.020 [0.51] Sq. 0.020 ±0.002 [0.51 ±0.05] 0.300 [7.62] 0.120 ±0.020 [3.05 ±0.05] 0.100 [2.54] 0.120 [3.05] 0.200 [5.08] 4 1 3 2 Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. 0555-3001-08 0.500 [12.70] max 0.500 [12.70] max 0.400 [10.16] max 0.020 [0.51] 0.110 [2.79] 0.100 [2.54] typ 0.020 ±0.001 [0.51 ±0.03] 0.300 [7.62] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-4 COMMON MODE CHOKES For LAN and Telecom Applications MECHANICALS CMC00100 0.600 [15.24] max 0555-6400-06 0.600 [15.24] max 0.400 [10.16] max 0.130 [3.30] 0.200 [5.08] 0.400 [10.16] 0.200 [5.08] x 2 0.100 [2.54] x 2 Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. 0.020 +0.002 [0.51 +0.05] 0.070 [1.78] ref 0.050 [1.27] 0.030 [0.76] S553-5999-D6 0.070 [1.78] 0.645 [16.38] 0.480 [12.19] 0.050 [1.27] 1.100 [27.94] max 0.212 [5.38] ref Suggested PCB Pad Layout R 0.015 [0.38] R 0.005 [0.13] 0.225 [5.72] max 0.950 [24.13] 0.035 [0.89] 0.004 [0.10] 0.600 [15.24] 0.010 - 0.015 [0.25 - 0.38] 0˚ - 5˚ Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-5 COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 MECHANICALS S555-0139-01 0.100 [2.54] 0.670 [17.02] 0.710 [18.03] 0.525 [13.34] 0.030 [0.76] 0.070 [1.78] 0.010 ±0.002 [0.25 ±0.05] Suggested PCB Pad Layout 0.795 [20.19] 0.030 [0.76] min 0˚- 8˚ 0.004 [1.10] 0.100 [2.54] typ 0.087 [2.21] ref 0.018 ±0.002 [0.46 ±0.05] 0.098 [2.49] max 0.002 [0.05] min Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. S555-1084-00 S555-2940-00 S555-5999-39 0.500 12.70 max 0.375 [9.53] max Suggested PCB Pad Layout 0.285 [7.24] max 0.425 [10.80] 0.018 ±0.002 [0.46 ±0.05] 0.050 [1.27] 0.070 [1.78] 0.025 [0.64] 0.050 [1.27] 0.225 [5.72] max 0.003 - 0.010 [0.08 - 0.25] 4˚ nom 0.350 ±0.01 [8.89 ±0.25] 0.008 - 0.012 [0.20 - 0.30] 0.004 [1.10] 0.035 [0.89] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-6 COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 MECHANICALS S555-5999-02 0.410 [10.41] 0.580 [14.73] 0.645 [16.38] 0.470 [11.94] 0.330 [8.38] 0.100 [2.54] typ 0.040 [1.02] 0.110 [2.79] R0.005 [R0.13] R0.005 [R0.13] Suggested PCB Pad Layout 0.015 [0.38] 0˚- 4˚ .004 [0.10] 0.030 ±0.002 [0.76 ±0.05] 0.100 [2.54] typ 0.055 [1.40] 0.085 [2.16] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. 0.500 12.70 max S555-5999-15 0.375 [9.53] max Suggested PCB Pad Layout 0.285 [7.24] max 0.425 [10.80] 0.018 ±0.002 [0.46 ±0.05] 0.100 [2.54] 0.025 [0.64] 1.00 [2.54] 0.225 [5.72] max 0.070 [1.78] 4˚ nom 0.004 [1.10] 0.003 - 0.010 [0.08 - 0.25] 0.300 ±0.01 [7.62 ±0.25] 0.008 - 0.012 [0.20 - 0.30] 0.035 [0.89] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-7 COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 MECHANICALS S555-5999-40 0.300 [7.62] Suggested PCB Pad Layout 0.375 0.280 [9.52] [7.11] 0.425 [10.80] 0.050 [1.27] 0.020 ±0.002 [0.51 ±0.05] 0.050 [1.27] 0.070 [1.78] 0.025 [0.64] 0.004 [1.10] 0.084 [2.13] max 0.150 ±0.005 [3.81 ±0.13] 0.068 [1.73] ref Between components and internal leads to seating plane with 0.002 [0.05] minimum clearance 0˚- 5˚ 0.032 [0.81] 0.300 [7.62] max S555-5999-41 0.375 [9.52] max 0.285 [7.24] max 0.018 ±0.002 [0.46 ±0.05] 0.425 [10.80] 0.050 [1.27] 0.050 [1.27] 0.070 [1.78] 0.025 [0.62] Suggested PCB Pad Layout 0.003 [0.08] min 0.200 [5.09] max 0.150 [3.81] 4˚ nom .004 [0.10] 0.008 - 0.012 [0.20 - 0.30] 0.035 [0.88] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-8 COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 MECHANICALS 0.530 [13.46] max S555-6400-08 0.100 [2.54] 0.650 [16.51] max 0.400 [10.16] 0.030 [0.76] 0.600 [15.24] 0.720 [18.29] max 0.390 [9.91] max .004 [0.10] 0.015 - 0.020 [0.38 - 0.51] 0.045 [1.14] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com CMC-9 COMMON MODE CHOKES For LAN and Telecom Applications CMC00100 COMMON MODE TEST CIRCUIT D.U.T. 50 50 HP 3577A Network Analyzer ©2000 Bel Fuse Inc. Specifications subject to change without notice. 01.00 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite F23, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com CMC-10