10BASE-T LAN MAGNETICS Filtered Modules LM00506 • Compatible with a variety of 10Base-T transceiver chipsets • Conforms to IEEE 802.3 standards • Through hole and surface mount packaging • Operating temperature 0° to 70° C • Minimum interwinding breakdown voltage of 1500 Vrms ELECTRICAL SPECIFICATIONS AT 25° C Configuration Insertion Loss dB max Attenuation dB min @30MHz Part Number Return Loss dB min Common to Common Mode Rejection dB min Crosstalk dB min TX RX 1MHz to 10MHz TX RX 1MHz to 10MHz 30MHz 50MHz 100MHz 1MHz to 10MHz S556-5999-A4 RFTC RFTC -1.0 -28 -16 -15 -40 -30 -30 -35 S556-5999-32 FTC FTC -1.0 -28 -16 -15 -45 -45 -35 -35 A556-2006-02* FTC FTC -1.0 -27 -17.5 -20 -35 -30 -25 -45 S556-5999-02 FTC FTC -1.0 -27 -17.5 -20 -35 -30 -25 -45 A556-2006-03 FTC FTC -1.0 -27 -17.5 -20 -35 -30 -25 -45 0556-2006-14 FTC FTC -1.0 -28 -17.5 -20 -40 -40 -30 -35 0556-3873-03 FTC FTC -1.0 -27 -20 -15 -40 -35 -30 -35 A556-2006-00 FTC FT -1.0 -27 -17.5 -20 -35 -30 -25 -45 A556-2006-DE FT FT -1.0 -27 -17.5 -20 --- --- --- -45 S556-5999-DE FT FT -1.0 -27 -17 -15 --- --- --- -35 *Operating temperature range -40° to +85° C Configuration Guide T Transformer C Choke F Low Pass Filters R Predistortion Resistors ©2002 Bel Fuse Inc. Specifications subject to change without notice. 09.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com L5-23 10BASE-T LAN MAGNETICS Filtered Modules LM00506 SCHEMATICS S556-5999-A4 1 2 TX 3 4 5 61.9 442 61.9 442 8 6 TX 1.21K 7 16 9 49.9 15 RX 14 49.9 11 RX 12 10 S556-5999-32 1:1 1 TX 8 3 6 TX 5 7 1:1 16 RX 9 14 11 RX 12 10 A556-2006-02 S556-5999-02 1 1:1 15 TX TX 2 14 3 6 RX 7 8 ©2002 Bel Fuse Inc. 16 1:1 11 10 RX 9 Specifications subject to change without notice. 09.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com L5-24 10BASE-T LAN MAGNETICS Filtered Modules LM00506 SCHEMATICS A556-2006-03 1 1:1 16 15 TX TX 2 14 3 1:1 6 11 10 RX RX 7 8 9 0556-2006-14 1:1 1 9 TX TX 10 2 5 1:1 3 7 RX RX 4 8 0556-3873-03 1 1:1 16 TX 2 15 TX 14 3 6 1:1 11 10 RX RX 7 8 9 ©2002 Bel Fuse Inc. Specifications subject to change without notice. 09.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com L5-25 10BASE-T LAN MAGNETICS Filtered Modules LM00506 SCHEMATICS A556-2006-00 1 1:1 16 TX 2 15 TX 3 14 6 1:1 11 10 RX RX 7 8 9 A556-2006-DE S556-5999-DE 1 16 2 15 3 14 6 ©2002 Bel Fuse Inc. 1:1 1:1 11 7 10 8 9 Specifications subject to change without notice. 09.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com L5-26 10BASE-T LAN MAGNETICS Filtered Modules LM00506 MECHANICALS S556-5999-32 S556-5999-A4 0.100 [2.54] 0.030 [0.76] 0.020 ±0.002 [0.51 ±0.05] 0.148 [3.76] ref 0.550 [13.97] 0.395 [10.03] 0.100 [2.54] 1.00 [25.40] max 0.215 [5.46] ref 0.070 [1.78] Suggested PCB Pad Layout 0.010 - 0.015 [0.25 - 0.38] 0.235 [5.97] max 0.700 [17.78] 0.004 [0.10] 0.500 [12.70] 0˚ - 4˚ 0.035 [0.89] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. 0.148 [3.76] ref S556-5999-02 S556-5999-DE 0.020 ±0.002 [0.51 ±0.05] 0.100 [2.54] 0.030 [0.76] 0.550 [13.97] 0.395 [10.03] 0.100 [2.54] 1.00 [25.40] max 0.215 [5.46] ref 0.070 [1.78] Suggested PCB Pad Layout 0.010 - 0.015 [0.25 - 0.38] 0.235 [5.97] max 0.700 [17.78] 0.500 [12.70] 0.035 [0.89] 0˚ - 4˚ Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2002 Bel Fuse Inc. Specifications subject to change without notice. 09.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com L5-27 10BASE-T LAN MAGNETICS Filtered Modules LM00506 MECHANICALS 0556-3873-03 0.400 [10.16] max 1.00 [25.40] max 0.350 [8.89] max 0.027 [0.69] ref 0.020 [0.51] 0.115 ±0.015 [2.92 ±0.38] 0.010 ±0.002 [0.25 ±0.05] 0.045 [1.14] 0.100 [2.54] 0.020 [0.51] 0.300 [7.62] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. 0556-2006-14 0.300 [7.62] max 1.00 [25.40] max A556-2006-00 A556-2006-02 A556-2006-03 A556-2006-DE 0.500 [12.70] max 0.120 - 0.150 [3.05 - 3.81] 0.285 0.325 [7.24] [8.25] max 0.100 [2.54] typ 0.100 [2.54] typ 0.300 [7.62] 0.800 [20.32] max 0.230 [5.84] max 0.200 [5.08] 0.018 [0.46] 0.120 - 0.150 [3.05 - 3.81] 0.900 [22.86] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. 0.015 [0.38] min 0.200 [5.08] max 100˚ 90˚ 0.120 [3.05] min 0.018 [0.46] ref 0.045 [1.14] ref 0.008 - 0.012 [0.20 - 0.30] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. ©2002 Bel Fuse Inc. Specifications subject to change without notice. 09.02 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com L5-28