defining a degree of excellence HIGH SPEED LAN MAGNETICS 960016B • Designed for use with Microlinear 6692/6694/6698 10/100 Mbps PHY transceivers • Surface mount or through-hole packaging options • 2000 Vrms isolation • Complies with IEEE 802.3 standards • Switching function integrated within magnetics module ELECTRICALS AT 25ºC Turns Ratio Part No. 0556-1060-00 0558-1060-00 S556-1060-01 S558-1060-01 TX RX Inductance OCL (µH) Min @8mA bias Return Loss (dB) Min 1-10MHz Insertion Loss (dB) Min 1-10MHz Attenuation (dB) Min 30MHz N/A 2:1 N/A 2:1 N/A 1:1 N/A 1:1 N/A 350 N/A 350 -15 -18 -15 -18 -1.0 -1.0 -1.0 -1.0 -28 -20 -28 -20 Commmon to Common Mode Rej (dB) Min 10-30MHz 100MHz N/A -40 N/A -40 N/A -30 N/A -30 Crosstalk (dB) Min 100kHz-100MHz Schematic Package Style N/A -30 N/A -30 A B C D 1 1 2 3 SCHEMATICS A B C D Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366 defining a degree of excellence HIGH SPEED LAN MAGNETICS 960016B MECHANICALS 1 2 3 Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: [email protected] Website: http://www.belfuse.com defining a degree of excellence HIGH SPEED LAN MAGNETICS 960016B APPLICATION CIRCUITS Specifications subject to change without notice. Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel: 201-432-0463 • Fax: 201-432-9542 • E-Mail: BelFuse@belfuse Website: http://www.belfuse.com defining a degree of excellence HIGH SPEED LAN MAGNETICS 960016B APPLICATION NOTES • 0556-1060-00 is for use with 0558-1060-00 and the S556-1060-01 is for use with S558-1060-01. • These Bel designs are for use with Microlinear 100 Mbps and various 10Base-T PHY devices that may require external filtering. Microlinear provides the following recommendations: Internal 10 BT Internal 10 BT Filters MAC Microlinear MII SYM 7-Wire DEC21140 6692, 2653 ✓ ✓ DEC21142 6692 ✓ DEC21143 6698 ✓ AM79C971 6692 ✓ I82557 6692, 2653 ✓ ✓* MC91C100 6692, 2653 ✓ ✓ MX98713 6698 ✓ TNETE100 6692 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ *I82557 muxes the MII and the 7-wire signals. • Vcc operating voltage of the Bel magnetics modules is recommended to be 5 volts, +/-5%. • Two 1ký resistors are recommended to provide bias voltage to the Microlinear chipset. • 0.1µF DC blocking capacitors are recommended to provide isolation between the 10 Mbps and 100 Mbps PHY transceivers. Corporate Office Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302-4496 Tel: 201-432-0463 Fax: 201-432-9542 E-Mail: [email protected] Internet: http://www.belfuse.com Far East Office Bel Fuse Ltd. 8F/8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel: 852-2328-5515 Fax: 852-2352-3706 European Office Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Preston PR1 8UD Lancashire, U.K. Tel: 44-1772-556601 Fax: 44-1772-888366