A. Input Characteristics: 1) Voltage: 120VAC +10/-15% 2) Frequency: 50/60 Hz. 3) Current: 24A Maximum (Derated for NA) 4) Load Capacity: 3.6 KVA 1 5) External Overload Protection Req'd - 30A C.B. 6) Power Cord: 10' (3m), #10/3 Type SJOOW Cord 7) Connector: L5-30P 8) TVS (CM,DM): 100 Joules 9) IL (See Chart) B. Output Characteristics: 1) Voltage: 120VAC Nominal 1 2) Overload Protection: (8) 1P/15A UL489 Circuit Breaker 3) Current: 24A MAX, Combined Load 4) Outlets: 8X2 Nema 5-20R C. Mechanical Characteristics: 1.5 [REF] 1) Material: CRS/G40 Galv. Coating 2) Finish: Powder Coat, Black, Fine Texture .626 D. Operating Environment: 1.749 3.000 3.470 3) Lettering: Silk-Screen, White/Epoxy 4) Storage Temp.: -(25) - 149C (-25 - 65C) 1) Temperature: 32 - 122F (0 - 50C) 2) Relative Humidity: 0 - 95% (Non-Condensing) 6.000 FRONT 3) Elevation: 0 - 10,000FT (0 - 3000 m) E. Regulatory Conformance: 1) Safety Agency: UL/cUL, UL60950-1 2) RoHS: Compliant to Directive 2002/95/EC INSERTION LOSS PERFORMANCE OF INTEGRAL EMI FILTER FREQ. MHZ .15 .45 1.0 2 5 10 30 COMMMON 9 18 23 28 35 40 52 MODE 78 66 17.000 54 INSERTION LOSS OF INTEGRATED EMI FILTER -TESTED PER MIL- STD-220 (NO LOAD, CM) 18.316 19.000 REAR 8x2 5-20R 1 54 REV 22 CHANGE NOTICE 18 8986-eng DIFFERENTI 12 AL MODE DRAWINGS IN ACCORDANCE WITH STANDARD ANSI Y14.5M-1994 . THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND IS COPYRIGHTED. EXCEPT WITH THE WRITTEN PERMISSION OF SPECTRUM CONTROL, INC. OR ITS SUBSIDIARIES, SUCH INFORMATION SHALL NOT BE PUBLISHED OR DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE AND THIS DOCUMENT SHALL NOT BE DUPLICATED IN WHOLE OR IN PART. DRAWN: Pruss TOLERANCES UNLESS OTHERWISE SPECIFIED: FRACTIONS ±1/64 DECIMAL .XX ± .020 DECIMAL .XXX ±.010 ANGLES ± 030' DATE 6/8/2009 Spectrum Management Systems PDU/TVS, 2U, 120V, 3.6kvA THIRD ANGLE PROJECTION SHEET: 1 OF 1 7200-A-39-3 CODE IDENT NO: STATE COLLEGE, PENNSYLVANIA