ADSL Magnetics Lucent TM01339 • Operating and storage temperature range: -40° to +85°C • Meets IEC 695, 2-2 flammability requirements • Minimum interwinding breakdown voltage of 1000 Vrms • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS at 25° C Turns Ratio ±2% Inductance1 mH ±8% Inductance mH min Leakage Inductance2 µH max (1-5) : (2-4) (1-5) at 90 mA DC (1-5) (1-5) (2-4) 1:1 2 1.85 5 8.5 8.5 Part Number 0560-6100-40 DCR Ω max 1. Inductance measured at 10 kHz, 0.1 Vac 2. Leakage inductance measured at 100 kHz, 0.1 Vac SCHEMATIC 0560-6100-40 1 2 5 4 ©2001 Bel Fuse Inc. Specifications subject to change without notice. 06.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics Lucent TM01339 MECHANICAL 0560-6100-40 1 3 0.370 (9.40) max 4 6 0.420 (10.67) max 0.400 (10.16) max 0.035 (0.9) X 0.012 (0.3) Solder Plated 0.020 (0.51) SQ., Solder Plated 0.100 (2.54) 0.095 (2.41) 0.134 ±0.012 (3.40 ±0.3) 0.100 (2.54) 0.200 (5.08) Dimensions are in inches (millimeters). Standard dimension tolerance is ±0.005 (0.13) unless otherwise noted. ©2001 Bel Fuse Inc. Specifications subject to change without notice. 06.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2