ADSL Magnetics Miniature EE5 Inductors TM00328 • Designed with two well balanced and coupled windings for use in ADSL applications where filtering is required • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Operating temperature range: -40° C to +85° C • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • Meets IEC 695, 2-2 flammability requirements ELECTRICAL SPECIFICATIONS AT 25° C Turns Ratio2 ± 1% Inductance µH (1-6) : (2-5) (1-6) (1-6) (2-5) between (1-6) & 2-5) S560-6100-16 1:1 50 (±5%)3 1.95 1.95 500 S560-6100-17 1:1 340 (±5%)3 5.8 5.8 500 S560-6100-18 1:1 170 (±5%)3 4.5 4.5 500 S560-6100-21 1:1 205 (±7.8%)3 5.5 5.5 500 S560-6100-22 1:1 91 (±7%)4 2 2 500 S560-6100-23 1:1 95.5 (±7%)4 2 2 500 S560-6100-25 1:1 300 (±7%)4 5.8 5.8 500 S560-6100-26 1:1 452 (±7%)4 8.5 8.5 500 S560-6100-27 1:1 505 (±7%)4 8.5 8.5 500 S560-6100-31 1:1 280 (±7%)3 4.8 4.8 500 S560-6100-321 1:1 91 (±7%)4 2 2 500 S560-6100-34 1:1 133 (±5%)3 2 2 500 S560-6100-35 1:1 153 (±5%)3 2.2 2.2 500 Part Number DCR Ω max Dielectric Rating VDC 1. replace winding (1-6) with (1-5) & replace winding (2-5) with (2-4) 2. measured at 20 kHz, 1 Vrms 3. measured at 10 kHz, 0.1 Vrms 4. measured at 100 kHz, 0.1 Vrms SCHEMATIC S560-6100-16 S560-6100-17 S560-6100-18 S560-6100-21 S560-6100-22 S560-6100-23 S560-6100-25 S560-6100-26 S560-6100-27 S506-6100-31 S560-6100-34 S506-6100-35 S560-6100-32 1 6 2 5 1 2 5 4 ©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-73 ADSL Magnetics Miniature EE5 Inductors TM00328 MECHANICAL S560-6100-16 S560-6100-17 S560-6100-18 S560-6100-21 S560-6100-22 S560-6100-23 S560-6100-25 S560-6100-26 S560-6100-27 S506-6100-31 S560-6100-32 S560-6100-34 S506-6100-35 SUGGESTED PCB PAD LAYOUT 0.230 (5.84) MAX 2 3 1 0.073 (1.85) 0.260 (6.60) MAX 0.330 (8.38) 0.060 (1.52) 4 5 6 0.045 (1.14) 0.210 (5.33) MAX 0.004 (0.10) 0.024 (0.60) 6 EDGES 0.073 (1.85) 0.260 (6.60) 0.325 (8.26) MAX ©2000 Bel Fuse Inc. Specifications subject to change without notice. 04.00 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T3-74