ADSL Magnetics GlobeSpan Annex B CO TM00333 • Designed to meet UL1950 and IEC950 safety requirements • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning • Operating temperature range: -40° C to +85° C • Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias • Meets IEC 695, 2-2 flammability requirements ELECTRICAL SPECIFICATIONS AT 25° C Part Number S560-6600-74 Turns Ratio1 ± 2% Inductance3 µH Leakage Inductance6 µH max5 (1-5) : (10-6)2 (10-6)4 (10-6)2 (1-4) (2-5) (9-6) (10-7) (1-5) & (10-6)2 1 : 1.4 95 - 105 10 0.50 0.50 0.60 0.60 1500 Package SMD DCR Ω max Dielectric Rating Vrms 1. measured at 20 kHz, 1 Vrms 2. connect terminals 2 to 4 & 7 to 9 3. measured at 10 kHz, 0.1 Vrms 4. connect terminals 7 to 9 5. measured at 100 kHz, 0.1 Vrms 6. short terminals 1, 2, 4, & 5 SCHEMATIC S560-6600-74 CHIP 1 10 4 7 2 9 5 6 LINE ©2000 Bel Fuse Inc. Specifications subject to change without notice. 10.00 Bel Fuse Inc. 198 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com T3-33 ADSL Magnetics GlobeSpan Annex B CO TM00333 MECHANICAL S560-6600-74 SUGGESTED PCB PAD LAYOUT 5 1 0.100 (2.54) 0.741 (18.82) 0.060 (1.52) 6 10 0.100 (2.54) 0.087 (2.21) 0.028 (0.71) 0.585 (14.86) MAX 0.540 (13.72) MAX 0.500 (12.70) MAX 0.005 (0.13) 10 EDGES 0.606 (15.39) 0.699 (17.75) MAX ©2000 Bel Fuse Inc. Specifications subject to change without notice. 10.00 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 198 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com T3-34