NON-ISOLATED DC/DC CONVERTERS 2.5V Input / 1.0 – 1.5V Output / 10A S7AH-10J / V7AH-10J Series PRELIMINARY • Compact surface mount package • Excellent thermal performance • High efficiency means less power dissipation • Remote on/off • Low cost Description The S/V7AH-10J Series are non-isolated step down DC/DC converters that operate from a nominal 2.5V source. These converters are available in a range of output voltages from 1.0V to 2.5V. They are offered in a compact ovemolded package rated at 10A. Optional lead-forming provides a vertical mount product for minimal footprint or a surface mount option for very low profile. Standard features include remote on/off, over current protection and output voltage adjust. These products maybe used almost anywhere low-voltage silicon is being employed and a 2.5V source is available. Typical applications include file servers, routers, line cards, and other computing and communications equipment. Part Selection Output Voltage 1.5V 1.2V 1.0V Input Voltage 2.5V 2.5V 2.5V Max. Output Current 10A 10A 10A Max. Output Power 15W 12W 10W Typical Efficiency 85% 83% 81% Part Number Surface Mount S7AH-10J150 S7AH-10J120 S7AH-10J100 Part Number Vertical Mount V7AH-10J150 V7AH-10J120 V7AH-10J100 Input Specifications Parameter Input Voltage Range Input Current (no load) Input Current (full load) Reflected Ripple Current (pk-pk) Min 2.25 VDC Typ Max 2.75 VDC Notes 8.0A 200mA pk-pk 60mA rms (worst case) With a simulated source impedance of 500nH, 5Hz to 20 MHz Max 110% 10A +2.0% Notes 30mA Output Specifications Parameter Voltage Adjustability Output Current Setpoint Accuracy Total Regulation Min 90% 0A -2.0% 1.5V 1.2V 1.0V Ripple and Noise Typ 60mV 48mV 40mV 100mV pk-pk 25mV rms Includes line, load and temperature. 0 to 20MHz Bandwidth Use 0.1uF ceramic on output Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 2.5V Input / 1.0 – 1.5V Output / 10A Output Specifications (continued) Parameter Min Typ Transient Response Max deviation Recovery to within ± 1% General Specifications Max Notes 160mV 60uS di/dt = 0.5A/uS, Vin =3.3VDC Ta = 25°C, 50-100% load change with 220uF tantalum external capacitance. Pin Connections Parameter Switching Frequency Dimensions Specification 300kHz typical (fixed) inches mm Weight Operating Temperature Non-Operating Temperature Protection Features Short circuit Over current Remote On/Off 0.7 x 0.65 x 0.32 17.78 x 16.51 x 8.13 5g -40°C to 85°C (see derating curve) -40°C to 125°C Pin 1 2 3 4 5 6 7 Function On/Off Vin Ground Vout Trim (S7AH only) NC (S7AH only) NC Continuous 130% to 250% max Io Active High bel bel bel bel V7AH-10Jxxx S7AH-10Jxxx 2003 Bel Fuse Inc. Specifications subject to change without notice. 032403 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F/ 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com