NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 5V Input / 1.5 – 3.3V Output / 6A BP01V7PB-06B V7PB-06B Series • Nonisolated • Industry standard pinout with shorter package length • Fixed frequency • High efficiency • Excellent thermal performance • Low cost • Remote on/off • Undervoltage lockout • Over current and short circuit protection Description The Bel V7PB-06B series modules are non-isolated, step down DC/DC power converters that operate from a nominal 5V source. These converters are available in a range of output voltages from 1.5V to 3.3V. They are packaged in an industry standard single-in-line footprint and provide a maximum 6A output. Standard features include remote on/off, over current protection and output voltage adjust. Optional features include remote sense and industrial temperature range. These products may be used almost anywhere low-voltage silicon is employed and a 5V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications Options • Telecommunications • Remote sense • Networking • Industrial temperature range • Computers and peripherals Part Number Selection Output Voltage Input Voltage Max. Output Current Max. Output Power Typical Efficiency Part Number Part Number Remote Sense Option 3.3V 5V 6A 19.8W 94% V7PB-06B330 V7PB-06B33S 2.5V 5V 6A 15.0W 91% V7PB-06B250 V7PB-06B25S 1.5V 5V 6A 9.0W 87% V7PB-06B150 V7PB-06B15S ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 5V Input / 1.5 – 3.3V Output / 6A BP01V7PB-06B Absolute Maximum Ratings Parameter Max Unit -0.3 6 V Vouten -0.3 6 V Ambient Temperature Tamb 0 70 °C Storage Temperature Tstor -40 105 °C Continuous Input Voltage Output Enable Terminal Voltage Symbol Min Vin Typical Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Symbol Min Operating Input Voltage Vin 4.5 Input Current Iin Typical Max Units 5.5 V 5.5 A 50 mA 10 mA Input Reflected Ripple Current1 35 mArms Input Reflected Ripple Current (P-P)1 120 mApk 0.02 A2s No Load Input Current Remote Off Input Current 3 I2t Inrush Current Transient 0.01 Turn On Voltage Threshold 4 Turn Off Voltage Threshold 3.45 3.9 V 4.45 V Note: Input capacitance 330µF/10V, ESR = 0.03 Ω max at 100kHz @ 25° C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 5V Input / 1.5 – 3.3V Output / 6A BP01V7PB-06B Output Specifications Parameter Module Min Typical Max 3.234 2.450 1.470 3.3 2.5 1.5 3.366 2.550 1.530 3.3V 2.5V 1.5V 7 5 3 16 10 10 All 3 10 3.3V 2.5V 1.5V 10 10 10 46 35 21 3.3V 2.5V 1.5V 20 18 16 72 55 40 Output Ripple and Noise2 All 60 100 mVp-p Output Ripple and Noise2 All 13 20 mVrms Output Current Range All Iout 0 6 A Output DC Current Limit All Ioutlim 7.8 15 A Output Voltage Set Point1 Symbol Vout 3.3V 2.5V 1.5V V Load Regulation Line Regulation Regulation Over Temperature 0° - 70° C Units mV mV mV Total Output Voltage Regulation mV Short Circuit Surge A2s Ioutsurge 3.3V 2.5V 1.5V Turn on Time All Overshoot at Turn On All Output Capacitance All Ton Cout 0.08 0.03 0.05 0.2 0.1 0.1 12 20 ms 0 3 % 2200 µF 50 100 mV 20 40 µs 50 100 mV 20 40 µs 0 Transient Response 3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Settling Time Ts All Ts Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin=5V, Iout=full load, Ta=25° C. 2. 0 - 20MHz BW, 0.1µF ceramic cap on output. 3. di/dt=0.5A/uS, Vin=5 VDC, Ta=25° C with a 47µF aluminum cap on output. ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 5V Input / 1.5 – 3.3V Output / 6A BP01V7PB-06B General Specifications Parameter Module Symbol Min Typical 91 88 84 94 91 87 230 300 Max η Efficiency1 3.3V 2.5V 1.5V Switching Frequency All Fsw Units % 340 kHz % Output Voltage Trim Range Remote Sense Compensation All Weight All 110 110 110 70 70 90 3.3V 2.5V 1.5V 0.5 6.1 V g 1. Vin=5V, full load and Ta=25° C. Control Specifications Parameter Remote On/Off Module Symbol All Vouten Min Typical Max Units V Signal Low (Unit On) All -0.3 0.3 V Signal High (Unit Off) All 2.8 5.5 V Thermal Considerations This product operates at maximum output current over the entire specified temperature range in a convection cooled environment. No thermal derating is necessary. ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 5V Input / 1.5 – 3.3V Output / 6A BP01V7PB-06B Efficiency Data Module 3.3V 97% EFFICIENCY 96% 95% 4.5V 94% 5.0V 93% 5.5V 92% 91% 90% 1 2 3 4 5 6 OUTPUT CURRENT EFFICIENCY Module 2.5V 96% 95% 94% 93% 92% 91% 90% 89% 88% 4.5V 5.0V 5.5V 1 2 3 4 5 6 OUTPUT CURRENT EFFICIENCY Module 1.5V 93% 92% 91% 90% 89% 88% 87% 86% 85% 84% 4.5V 5.0V 5.5V 1 2 3 4 5 6 OUTPUT CURRENT ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 5V Input / 1.5 – 3.3V Output / 6A BP01V7PB-06B Ripple and Noise Ripple and noise at full load and 5Vdc input and Ta=25° C Transient Response Transient response: di/dt = 0.5A/µS, external load capacitance Co = 47µF (electrolytic) 50% to 100% load transients at 5V input and Ta=25° C 100% to 50% load transients at 5V input and Ta=25° C ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 5V Input / 1.5 – 3.3V Output / 6A BP01V7PB-06B Mechanical 0.20 [5.08] 0.063 [1.60] 2.16 [54.86] 0.13 [3.30] 0.55 [13.97] 0.10 [2.54] 0.342 [8.69] max 0.025 [0.64] 0.291 [7.40] 1.90 [48.26] 0.13 [3.30] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Pin Function 1 +Vo 2 +Vo 3* No Pin 4 +Vo 5 Ground 6 Ground 7 +Vin 8 +Vin 9 No Pin 10 Trim 11 Remote On/Off 6 7 8 9 10 11 1 2 3 4 5 *Pin 3 used for remote sense option. ©2002 Bel Fuse Inc. Specifications subject to change without notice. 01.02 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 7