NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A VRPC-10A Series RoHS Compliant • Nonisolated • Industry standard pinout • Fixed frequency • High efficiency means less power dissipation • Optimized for cost • Remote on/off • Undervoltage lockout • Over current and short circuit protection Description The Bel VRPC-10A series modules are non-isolated, step down DC/DC power converters that operate from a nominal 12V source. These converters are available in a range of output voltages from 1.5V to 3.3V. They are packaged in an industry standard single-in-line footprint and provide a maximum 10A output. Standard features include remote on/off, over current protection and output voltage adjust. Remote sense is an optional feature. These products may be used almost anywhere low-voltage silicon is employed and a 12V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications Options • Telecommunications • • Networking • Computers and peripherals Remote sense Part Number Selection Output Voltage Input Voltage Max. Output Current Max. Output Power Typical Efficiency Part Number Part Number Remote Sense Option 3.3V 12V 10A 33W 91% VRPC-10A330 VRPC-10A33S 2.5V 12V 10A 25W 89% VRPC-10A250 VRPC-10A25S 1.5V 12V 10A 15W 85% VRPC-10A150 VRPC-10A15S ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A Absolute Maximum Ratings Parameter Max Unit -0.3 15 V Vouten -0.3 15 V Ambient Temperature Tamb 0 70 °C Storage Temperature Tstor -40 100 °C Continuous Input Voltage Output Enable Terminal Voltage Symbol Min Vin Typical Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Symbol Min Operating Input Voltage Vin 10.8 Input Current Iin Typical Max Units 13.2 V 3.8 A 50 mA 15 mA Input Reflected Ripple Current1 50 mArms Input Reflected Ripple Current (P-P)1 180 mApk 0.16 A2s No Load Input Current Remote Off Input Current 3 I2t Inrush Current Transient 0.08 Turn On Voltage Threshold 9.7 Turn Off Voltage Threshold 8.0 8.8 V 10.0 V Note: Input capacitance 470µF/16V, ESR = 0.03 Ω max at 100kHz @ 25° C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A Output Specifications Parameter Module Min Typical Max 3.247 2.460 1.476 3.3 2.5 1.5 3.353 2.540 1.524 3.3V 2.5V 1.5V 7 5 3 16 10 10 All 3 10 3.3V 2.5V 1.5V 5 5 5 46 35 20 3.3V 2.5V 1.5V 15 10 10 72 55 40 3.3V 2.5V 1.5V 55 50 45 100 100 100 3.3V 2.5V 1.5V 17 15 10 25 25 25 Output Voltage Set Point1 Symbol Vout 3.3V 2.5V 1.5V V Load Regulation Line Regulation Regulation Over Temperature 0° - 70° C Units mV mV mV Total Output Voltage Regulation mV Output Ripple and Noise2 mVp-p Output Ripple and Noise2 mVrms Output Current Range All Iout 0 10 A Output DC Current Limit All Ioutlim 13 22 A Short Circuit Surge A2s Ioutsurge 3.3V 2.5V 1.5V Turn on Time All Overshoot at Turn On All Output Capacitance All Ton Cout 100 0.35 0.40 0.35 0.7 0.8 0.7 50 80 ms 0 3 % 3300 µF Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin = 12V, Iout = full load, Ta = 25° C. 2. 0 - 20MHz BW, 0.1µF ceramic cap on output. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A Output Specifications Parameter Module Symbol Min Typical Max Units 100 150 mV 40 70 µs 100 150 mV 40 70 µs 80 150 mV 30 70 µs 80 150 mV 30 70 µs 60 150 mV 30 70 µs 60 150 mV 30 70 µs Transient Response 3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Ts 3.3V Settling Time Ts Transient Response 3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Ts 2.5V Settling Time Ts Transient Response 3 ∆V 50% to 100% of Max Load Settling Time ∆V 100% to 50% of Max Load Ts 1.5V Settling Time Ts Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 3. di/dt = 0.5A/uS, Vin = 12VDC, Ta = 25° C, and with a 470µF aluminum cap on output. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A General Specifications Parameter Module Symbol Efficiency1 c η Switching Frequency All Min Typical 88 86 82 91 89 85 180 200 Max Units % Fsw 220 kHz % Output Voltage Trim Range 3.3V 2.5V 1.5V Remote Sense Compensation All Weight All 110 120 120 85 70 90 0.5 V 9.5 g 1. Vin=12V, full load and Ta=25° C. Control Specifications Parameter Remote On/Off Module Symbol All Vouten Min Typical Max Units V Signal Low (Unit Off) All -0.3 0.3 V Signal High (Unit On) All 2.8 13.2 V ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A Efficiency Data Module 3.3V 96.0% EFFICIENCY 94.0% 92.0% 10.8V 90.0% 12.0V 88.0% 13.2V 86.0% 84.0% 82.0% 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 OUTPUT CURRENT Module 2.5V EFFICIENCY 94.0% 92.0% 10.8V 12.0V 90.0% 88.0% 13.2V 86.0% 84.0% 82.0% 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 OUTPUT CURRENT EFFICIENCY Module 1.5V 92.0% 90.0% 88.0% 86.0% 84.0% 82.0% 80.0% 78.0% 76.0% 74.0% 10.8V 12.0V 13.2V 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 OUTPUT CURRENT ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A Ripple and Noise Ripple and noise at full load and 12Vdc input and Ta=25° C Transient Response Transient response: di/dt = 0.5A/µS, external load capacitance Co = 470µF (electrolytic) 50% to 100% load transients at 12V input and Ta=25° C 100% to 50% load transients at 12V input and Ta=25° C ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 7 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A Thermal Considerations 10 Derating Curve 300LFM Output Current (A) 8 6 4 Natural Convection 2 0 0˚C 10˚C 20˚C 30˚C 40˚C 50˚C 60˚C 70˚C Ambient Temperature, Ta (˚C) Output Current vs. Local Ambient Temperature and Air Velocity ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 12V Input / 1.5 – 3.3V Output / 10A BP06VRPC-10A Mechanical 0.36 [9.15] max 2.50 [63.50] 0.10 [2.54] 0.55 [13.97] 0.063 [1.60] 0.025 [0.64] 0.28 [7.11] 0.10 [2.54] 1.90 [48.26] 0.13 [3.30] 0.141 [3.59] 0.15 [3.81] Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Pin Function 1 +Vo 2 +Vo 3* No Pin 4 +Vo 5 Ground 6 Ground 7 +Vin 8 +Vin 9 No Pin 10 Trim 11 Remote On/Off 1234 5 6 7 8 91011 *Pin 3 used for remote sense option. RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. These parts are not however compatible with the higher temperatures associated with lead free solder processes and must be soldered using a reflow profile with a peak temperature of no more than 240ºC. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 06.06 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 9