NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP05VRPB-10C VRPB-10C Series RoHS Compliant • Nonisolated • Industry standard footprint • Fixed frequency • High efficiency means less power dissipation • Excellent thermal performance • Optimized for cost • Remote on/off • Remote sense • Undervoltage lockout (UVLO) • Over current and short circuit protection • Industrial temperature range Description The Bel VRPB-10C modules are a series of non-isolated, step down DC/DC power converters that operate from a nominal 3.3V source. These converters are available in a range of output voltages from 0.9V to 2.5V. They are packaged in a compact, SIP package rated at 10A. Standard features include remote on/off, over current and short circuit protection, output voltage adjust and industrial temperature range (-40° to +85° C). The output is closely regulated and the efficiency is typically 95% @ 2.5V output at full load. These products may be used almost anywhere low voltage silicon is employed and a 3.3V source is available. Typical applications include file servers, routers, line cards and other computing and communications equipment. Applications • Distributed power architectures • Data networking equipment • Telecommunications • Computers and peripherals Part Number Selection Output Voltage Input Voltage Max. Output Current Max. Output Power Typical Efficiency Part Number Remote Sense Active Low Part Number Remote Sense Active High 2.5V 3.3V 10A 25W 95% VRPB-10C25L VRPB-10C25S 1.8V 3.3V 10A 18W 92.5% VRPB-10C18L VRPB-10C18S 1.5V 3.3V 10A 15W 91.5% VRPB-10C15L VRPB-10C15S 1.2V 3.3V 10A 12W 90% VRPB-10C12L VRPB-10C12S 0.9V 3.3V 10A 9W 87% VRPB-10C09L VRPB-10C09S ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP06VRPB-10C Absolute Maximum Ratings Parameter Max Unit -0.3 4 V Vouten -0.3 6 V Ambient Temperature Tamb -40 85 °C Storage Temperature Tstor -55 105 °C Continuous Input Voltage Output Enable Terminal Voltage Symbol Min Vin Typical Note: Use beyond the maximum ratings may cause a reliability degradation of the DC/DC converter or may permanently damage the device. Input Specifications Parameter Operating Input Voltage Module Symbol Min Typical Max Units All Vin 3 3.3 3.6 V Input Current Iin A 2.5V 1.8V 1.5V 1.2V 0.9V 10 7.3 6.2 5.0 3.9 No Load Input Current mA 2.5V 1.8V 1.5V 1.2V 0.9V 120 165 150 180 165 220 220 220 220 220 2.5V 1.8V 1.5V 1.2V 0.9V 6 6 3 3 3 10 10 10 10 10 2.5V 1.8V 1.5V 1.2V 0.9V 25 30 30 28 23 60 60 60 60 60 2.5V 1.8V 1.5V 1.2V 0.9V 80 95 95 92 75 150 150 150 150 150 2.5V 1.8V 1.5V 1.2V 0.9V 0.020 0.010 0.010 0.006 0.006 Turn On Voltage Threshold All 2.8 V Turn Off Voltage Threshold All 2.5 V Remote Off Input Current mA Input Reflected Ripple Current1 mArms Input Reflected Ripple Current 1 mApk I2t Inrush Current Transient ©2006 Bel Fuse Inc. A2s Note: Input capacitance two 270µF/ 16V, ESR = 0.018 Ω max at 100kHz @ 25° C. 1. With simulated source impedance of 500nH, 5Hz to 20MHz. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 2 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP05VRPB-10C Output Specifications Parameter Module Min Typical Max 2.450 1.764 1.470 1.176 0.882 2.5 1.8 1.5 1.2 0.9 2.550 1.836 1.530 1.224 0.918 2.5V 1.8V 1.5V 1.2V 0.9V 6 5 4 4 4 12.5 9.0 7.5 7.5 7.5 2.5V 1.8V 1.5V 1.2V 0.9V 4 3 3 3 3 7.5 5.5 4.5 4.5 4.5 2.5V 1.8V 1.5V 1.2V 0.9V 30 20 15 15 10 50 40 30 25 20 2.5V 1.8V 1.5V 1.2V 0.9V 40 28 22 22 17 70 54.5 42 37 32 2.5V 1.8V 1.5V 1.2V 0.9V 20 25 25 22 20 40 40 40 40 40 2.5V 1.8V 1.5V 1.2V 0.9V 5 6 6 6 5 10 10 10 10 10 Output Voltage Set Point 1 Symbol Vout 2.5V 1.8V 1.5V 1.2V 0.9V Units V Load Regulation mV Line Regulation mV Regulation Over Temperature mV Total Output Voltage Regulation mV Output Ripple and Noise 2 mVpk Output Ripple and Noise 2 mVrms Output Current Range All Iout 0 10 A Output DC Current Limit All Ioutlim 13 25 A Shor t Circuit Surge A2 s Ioutsurge 0.23 0.22 0.22 0.20 0.27 2.5V 1.8V 1.5V 1.2V 0.9V Turn on Time All Overshoot at Turn On All Output Capacitance All Ton Cout 0 6 10 ms 0 3 % 5600 µF Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 1. Vin = 3.3V, Iout = full load, Ta = 25° C. 2. 0 - 20MHz, 1µF ceramic cap on output. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 3 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP06VRPB-10C Output Specifications Parameter Module Transient Response Symbol Min Typical Max Units 90 130 mV 30 50 µs 100 130 mV 30 50 µs 85 120 mV 30 50 µs 90 120 mV 30 50 µs 80 120 mV 30 50 µs 85 120 mV 30 50 µs 80 110 mV 30 50 µs 85 110 mV 30 50 µs 75 100 mV 30 50 µs 75 100 mV 30 50 µs 3 ∆V 50% to 100% of Max Load Settling Time Ts 2.5V ∆V 100% to 50% of Max Load Settling Time Ts Transient Response 3 ∆V 50% to 100% of Max Load Settling Time Ts 1.8V ∆V 100% to 50% of Max Load Settling Time Ts Transient Response 3 ∆V 50% to 100% of Max Load Settling Time Ts 1.5V ∆V 100% to 50% of Max Load Settling Time Ts Transient Response 3 ∆V 50% to 100% of Max Load Settling Time Ts 1.2V ∆V 100% to 50% of Max Load Settling Time Ts Transient Response 3 ∆V 50% to 100% of Max Load Settling Time Ts 0.9V ∆V 100% to 50% of Max Load Settling Time Ts Note: All specifications are typical at nominal input, full load at 25° C unless otherwise stated. 3. di/dt = 0.5A/1µS, Ta = 25° C without external load capacitance. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 4 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP05VRPB-10C General Specifications Parameter Module Symbol Min Typical 92 90.5 89 88 85 95 92.5 91.5 90 87 250 300 Max η Efficiency1 2.5V 1.8V 1.5V 1.2V 0.9V Switching Frequency All Output Voltage Trim Range2 All Fsw % 90 Remote Sense Compensation Weight Units All 340 kHz 110 % 10 % 9.2 g 1. Vin=3.3V, full load and Ta=25° C. 2. See graphs on pages 11-15. Control Specifications Parameter Remote On/Off 3 Module Symbol All Vouten Signal Low (Unit Off) Min Typical Max Units V -0.3 0.8 V 2.5 5.5 V -0.3 0.8 V 2.5 5.5 V VRPB-10CxxS Signal High (Unit On) Signal Low (Unit On) VRPB-10CxxL Signal High (Unit Off) 3. With remote on/off pin 11 open, the module is on. Note: On/off pin designed to work with an open collector/drain switch. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 5 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP06VRPB-10C Efficiency Data Module 1.8V Module 2.5V 95% 96% 93% 91% 89% Efficiency Efficiency 94% 92% 90% 87% 85% 83% 81% 79% 88% 77% 86% 75% 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 Output Current 3.0V 6 7 8 9 10 Output Current 3.3V 3.6V 3.0V 3.3V 3.6V Module 1.5V 93% 91% Efficiency 89% 87% 85% 83% 81% 79% 77% 75% 1 2 3 4 5 6 7 8 9 10 Output Current 3.0V 3.3V 3.6V Module 0.9V 91% 89% 87% 85% 83% 81% 79% 77% 75% 73% 71% 69% 67% 65% Efficiency Efficiency Module 1.2V 1 2 3 4 5 6 7 8 9 Output Current 3.0V ©2006 Bel Fuse Inc. 3.3V 10 90% 88% 86% 84% 82% 80% 78% 76% 74% 72% 70% 68% 66% 64% 62% 60% 1 2 3 4 5 6 7 8 9 Output Current 3.6V 3.0V 3.3V 3.6V Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 6 10 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A POWER PRODUCTS BP05VRPB-10C Ripple and Noise 1µF ceramic cap added at the output. Ripple and noise at full load and 3.3Vdc input, 2.5Vdc output and Ta=25° C Ripple and noise at full load and 3.3Vdc input, 1.5Vdc output and Ta=25° C Ripple and noise at full load and 3.3Vdc input, 1.8Vdc output and Ta=25° C Ripple and noise at full load and 3.3Vdc input, 1.2Vdc output and Ta=25° C Ripple and noise at full load and 3.3Vdc input, 0.9Vdc output and Ta=25° C ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 7 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A BP06VRPB-10C Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance Vout=2.5V 50% to 100% load transients at 3.3V input and Ta=25° C Vout=2.5V 100% to 50% load transients at 3.3V input and Ta=25° C Vout=1.8V 50% to 100% load transients at 3.3V input and Ta=25° C Vout=1.8V 100% to 50% load transients at 3.3V input and Ta=25° C Vout=1.5V 50% to 100% load transients at 3.3V input and Ta=25° C ©2006 Bel Fuse Inc. Vout=1.5V 100% to 50% load transients at 3.3V input and Ta=25° C Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 8 NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A POWER PRODUCTS BP05VRPB-10C Transient Response Transient response: di/dt = 0.5A/µS, no external load capacitance Vout=1.2V 50% to 100% load transients at 3.3V input and Ta=25° C Vout=1.2V 100% to 50% load transients at 3.3V input and Ta=25° C Vout=0.9V 50% to 100% load transients at 3.3V input and Ta=25° C Vout=0.9V 100% to 50% load transients at 3.3V input and Ta=25° C ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 9 POWER PRODUCTS NON-ISOLATED DC/DC CONVERTERS 3.3V Input / 0.9V – 2.5V Output / 10A BP06VRPB-10C Thermal Considerations VRPB-10C Output Voltage Set-Point Adjustment Trim Down Circuit Vout Sense Rtrim Down Module Trim Gnd Trim Up Circuit Vout Sense Module Trim Rtrim Up Gnd ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 10 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP05VRPB-10C Output Voltage Set-Point Adjustment VRPB-10C25S Trim Resistor Calculation Vo_nom = 2.504 Unit:Volt Rtrim_down ( Vo_adj) := 2.15⋅ ( Vo_adj − 0.8) Unit:Kohm −2 Vo_nom − Vo_adj 1.72 −2 Vo_adj − Vo_nom Rtrim_up ( Vo_adj) := Unit:Kohm V7PB-10C25S Rtrim_down Curve 912.75 732.26 551.76 Rtrim_down( Vo_adj) 371.26 190.77 10.27 2.25 2.3 2.35 2.4 2.45 2.5 2.7 2.75 Vo_adj V7PB-10C25S Rtrim_up Curve 228.56 172.67 Rtrim_up ( Vo_adj) 116.78 60.88 4.99 2.51 2.56 2.61 2.65 Vo_adj ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 11 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP06VRPB-10C Output Voltage Set-Point Adjustment VRPB-10C18S Trim Resistor Calculation Unit:Volt Vo_nom = 1.804 Rtrim_down ( Vo_adj) := 2⋅ ( Vo_adj − 0.8) − 1.78 Unit:Kohm Vo_nom − Vo_adj Rtrim_up ( Vo_adj) := 1.6 − 1.78 Vo_adj − Vo_nom Unit:Kohm V7PB-10C18S Rtrim_down Curve 360.08 271.84 Rtrim_down( Vo_adj) 183.6 95.35 7.11 1.62 1.66 1.69 1.73 1.76 1.8 1.95 1.98 Vo_adj V7PB-10C18S Rtrim_up Curve 230.4 174.63 Rtrim_up ( Vo_adj) 118.87 63.1 7.33 1.81 1.84 1.88 1.91 Vo_adj ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 12 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP05VRPB-10C Output Voltage Set-Point Adjustment VRPB-10C15S Trim Resistor Calculation Vo_nom = 1.504 Unit:Volt 2.15⋅ ( Vo_adj − 0.8) − 1.78 Vo_nom − Vo_adj Rtrim_down ( Vo_adj) := Rtrim_up ( Vo_adj) := Unit:Kohm − 1.78 1.72 Unit:Kohm Vo_adj − Vo_nom V7PB-10C15S Rtrim_down Curve 325.57 245.66 Rtrim_down( Vo_adj) 165.74 85.83 5.91 1.35 1.38 1.41 1.44 1.47 1.5 1.62 1.65 Vo_adj V7PB-10C15S Rtrim_up Curve 218.82 166.61 Rtrim_up ( Vo_adj) 114.4 62.19 9.98 1.51 1.54 1.57 1.59 Vo_adj ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 13 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP06VRPB-10C Output Voltage Set-Point Adjustment VRPB-10C12S Trim Resistor Calculation Unit:Volt Vo_nom = 1.204 2.15⋅ ( Vo_adj − 0.8) − 0.825 Vo_nom − Vo_adj Rtrim_down ( Vo_adj) := Unit:Kohm Rtrim_up ( Vo_adj) := Unit:Kohm 1.72 − 0.825 Vo_adj − Vo_nom V7PB-10C12S Rtrim_down Curve 168.08 127.07 Rtrim_down( Vo_adj) 86.05 45.04 4.03 1.08 1.1 1.13 1.15 1.18 1.2 1.3 1.32 Vo_adj V7PB-10C12S Rtrim_up Curve 235.24 179.93 Rtrim_up ( Vo_adj) 124.63 69.32 14.01 1.21 1.23 1.25 1.28 Vo_adj ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 14 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP05VRPB-10C Output Voltage Set-Point Adjustment VRPB-10B090 Trim Resistor Calculation Unit:Volt Vo_nom = 0.903 1.05⋅ ( Vo_adj − 0.8) − 0.010 Vo_nom − Vo_adj Rtrim_down ( Vo_adj) := Unit:Kohm Rtrim_up ( Vo_adj) := Unit:Kohm 0.84 − 0.010 Vo_adj − Vo_nom V7PB-10C09S Rtrim_down Curve 31.68 25.36 19.05 Rtrim_down( Vo_adj) 12.73 6.42 0.1 0.81 0.83 0.85 0.86 0.88 0.9 Vo_adj V7PB-10C09S Rtrim_up Curve 102.23 78.84 Rtrim_up ( Vo_adj) 55.45 32.07 8.68 0.91 0.93 0.95 0.96 0.98 1 Vo_adj ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 15 NON-ISOLATED DC/DC CONVERTERS POWER PRODUCTS 3.3V Input / 0.9V – 2.5V Output / 10A BP05VRPB-10C Mechanical VRPB-10C 0.387 [9.84] 0.224 [5.70] 2.00 [50.80] 0.55 [13.97] 0.063 [1.60] 0.15 [3.81] 0.025 [0.64] 0.05 [1.27] 0.10 [2.54] 1 2 3 4 5 0.09 [2.30] max Pin Function 1 +Vo 2 +Vo 3 Remote Sense Option 4 +Vo 5 Ground 6 Ground 7 +Vin 8 +Vin 9 No Pin 10 Trim 11 Remote On/Off 6 7 8 91011 RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. ©2006 Bel Fuse Inc. Specifications subject to change without notice. 02.06 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 16