BCM5325 ® FIVE-PORT 10/100 SWITCH WITH ON-CHIP PACKET BUFFER FEATURES SUMMARY OF BENEFITS • The highest level of silicon integration achieved for a five-port • Enables a new generation of lower cost 10/100 switches in 10/100 Ethernet switch device much smaller form factors • Fourth generation switch on a chip • The BCM5325 integrates: • • • • • Utilizes field-proven industry-standard 10BASE-T/100BASE- Five transceivers (802.3u compliant) Six media access controllers (802.x compliant) 128-KB packet buffer Non-blocking switch fabric • Packet classification 802.1p QoS priority queues • Port-based VLAN • MII or 7-wire interface supports an additional 100FX or 100TX connection enabling a sixth user connection or uplink • Supports up to 2K MAC addresses • Flow control: full-duplex (802.3x) and half-duplex options supported • • • • Typical power consumption: < 1.4W • Flexible interfaces support a wider variety of application needs—fiber for long distances or an additional 100TX port • Sufficient address range handles all remote office, branch office and home office needs • Port VLAN and 802.1p priority enables the switch to be designed into a wide variety of applications • CPUs are not required to initialize and run in cost-sensitive unmanaged applications—providing true Plug and Play connectivity • Internal oscillator circuit simplifies design and reduces overall system cost Supports automatic address learning and aging Internal oscillator circuit TX Fast Ethernet transceivers—lowering overall system interoperability and reliability risks • On-chip HP auto-MDI/MDIX feature automatically detects and corrects for crossover cables and allows direct switch-toswitch connection 128-pin PQFP package Low Cost Five-Port 10/100 Stand-alone Switch OVERVIEW A uto MDI/MDIX 10/100 P HY MA C A uto MDI/MDIX 10/100 P HY MA C A uto MDI/MDIX 10/100 P HY MA C A uto MDI/MDIX 10/100 P HY MA C A uto MDI/MDIX 10/100 P HY MA C S witc h F abric and A R L L ogic P riority Mapping R egis ter 802.1p DMA Interfac e MII or 7 wire Interfac e MA C 128 K B P ac ket B uffer E 2P R OM Interfac e E 2P R OM Interfac e The Broadcom BCM5325 device is a highly integrated solution. It combines all of the functions of a high-speed switch system— including packet buffer, PHY transceivers, media access controllers, address management, and a nonblocking switch fabric—into a single 0.18µ CMOS device. It complies with the IEEE 802.3, 802.3u, and 802.3x specifications, including the MAC control PAUSE frame and auto-negotiation subsections, providing compatibility with all industry-standard Ethernet and Fast Ethernet devices. L E D Interfac e L E Ds This device contains five full-duplex 10BASE-T/100BASE-TX Fast Ethernet transceivers, each of which performs all of the physical layer interface functions for 10BASE-T Ethernet on Category 3, 4, or 5 Unshielded Twisted-Pair (UTP) cable and 100BASE-TX Fast Ethernet on Category 5 UTP cable. E2PROM interfaces provide easy programming of the 802.1p QoS queues. This allows switch traffic to be given different classes of priority or service, for example, voice traffic for IP phone applications, video traffic for multimedia applications, or data traffic for e-mail applications. Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2004 by BROADCOM CORPORATION. All rights reserved. 5325-PB05-R 07/13/04 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: [email protected] Web: www.broadcom.com