BCM5380M ® 8FE+2GE PORT SWITCH WITH ON-CHIP PACKET BUFFER SUMMARY OF BENEFITS FEATURES • The highest level of silicon integration achieved for an eight+two-port, 10/100/1000 Ethernet switch device • Enables a new generation of lower cost switches with gigabit • • Sixth-generation switch on a chip • The BCM5380M integrates: • Eight 10/100 transceivers (802.3u compliant) • Nine 10/100 media access controllers (802.x compliant) • Two 10/100/1000 media access controllers • One integrated 10/100/1000BASE-T/TX transceiver (802.3ab compliant) • 256-KB packet buffer and 128-KB control memory • Nonblocking switch fabric • One integrated 1-Gbps SerDes module • • Cascadable to 24 Fast Ethernet + 6 Gigabit Ethernet ports through a SerDes expansion port, 24FE + 2GE nonblocking • • • Packet classification 802.1p QoS priority queues • • • • • • • Supports up to 4,000 unicast MAC addresses • • VLAN 4K 802.1Q or port-based supported • Reverse MII, MII, or 7-wire interface supports an additional 100BASEFX or 100BASE-TX connection or uplink • Flow control: full-duplex (802.3x) and half-duplex options supported Supports automatic address learning and aging • Internal oscillator circuit • Low power 0.13-µm 1.2V CMOS core: 3.5 W Pd. 324-pin FBGA package (small form factor 19 mm ∞ 19 mm) • Management features: • Low-cost MIB Autocast™ function • Hardware support for simple network management protocol (SNMP), remote network monitoring (RMON), and spanning tree connectivity and much smaller form factors Uses field-proven industry-standard 10BASE-T /100BASE-TX Fast Ethernet/100BASE-T transceivers—lowers overall system interoperability and reliability risks Flexible interfaces support a wider variety of application needs—SerDes, fiber for long distances or additional 100/1000TX ports Provides the most cost-effective gigabit connectivity to the desktop for all remote, branch, and home office needs 802.1Q tag VLAN, trunking, and 802.1p priority enables the switch to be designed into a wide variety of applications from unmanaged to smart/managed switches CPUs are not required to initialize and run in cost-sensitive unmanaged applications, providing true Plug and Play connectivity Internal oscillator circuit simplifies design and reduces overall system cost Ability to gather and support basic management statistics with only a very low-cost microcontroller Low-cost management using the on-chip MIB registers allows the collection and transmission of statistics for each port and allows an upward migration path for corporate users On-chip HP auto-MDI/MDIX on all transceivers automatically detects and corrects for crossover cables and allows direct switch-to-switch connection Scalable and Cost-Effective Solutions for 8+1 or 16+2 or 24+3 Port 10/100/1000 Unmanaged/Managed/Smart Switch Optional ARM7 Management Module Optional uP or EEPROM Smart switch option SMP 8051 or EEPROM ARM MII BCM5380 BCM5380 10/100 10/100 10/100/1000 Expansion BCM5380 10/100 10/100/1000 10/100/1000 OVERVIEW Auto-MDI/MDIX 10/100 PHY MAC Auto-MDI/MDIX 10/100 PHY MAC Auto-MDI/MDIX 10/100 PHY MAC Auto-MDI/MDIX 10/100 PHY MAC Auto-MDI/MDIX 10/100 PHY MAC Auto-MDI/MDIX 10/100 PHY MAC Auto-MDI/MDIX 10/100 PHY MAC Auto-MDI/MDIX 10/100 PHY MAC Switch controller 802.1Q VLAN tag (4K) 4K address table 802.1p QoS 2 Level Priority MAC MII Interface Expansion interface MIB Registers & ARL SerDes Auto-MDI/MDIX CPU Interface 256 KB GMAC GMII/SerDes Interface Packet buffer 10/100/1000 PHY GMAC LED Interface SPI/CPU Interface The Broadcom BCM5380M device is a highly integrated solution. It combines all of the functions of a high-speed switch system including packet buffer, PHY transceivers, media access controllers, address management, and a nonblocking switch fabric into a single 0.13-µm CMOS device. It complies with the IEEE 802.3, 802.3u, 802.3ab 802.3x specifications including the MAC control, pause frame, and autonegotiation subsections, providing compatibility with all industrystandard Ethernet, and Fast Ethernet, and Gigabit Ethernet devices. This device contains eight full-duplex 10BASE-T/100BASE-TX Fast Ethernet transceivers and one 10/100/1000BASE-T transceiver, each of which performs all of the physical layer interface functions for 10BASE-T Ethernet on Category 3, 4, or 5 unshielded twisted pair (UTP) cable and 100BASE-TX Fast Ethernet on Category 5 UTP cable. SPI or EEPROM interfaces provide easy programming of the 802.1p QoS. This allows switch traffic to be given different classes of priority or service—for example, voice traffic for IP phone applications, video traffic for multimedia applications, or data traffic for e-mail applications. Up to 4,000 VLANs can be set up via the SPI port. LEDs Even though this device is primarily targeted for the cost-sensitive unmanaged market, very low cost management can also be provided utilizing the proprietary MIB Autocast function. MIB Autocast encapsulates the on-chip MIB statistics and sends them out automatically on a predefined port (or ports) at programmed intervals. This feature is part of the 8051 micro smart-switch option for basic smart management via a console port. As part of the Smart Switch mode, the BCM5380M periodically transmits Ethernet frames on a designated port. The frames can be intercepted by an external management probe or a dedicated network management application resident on any node within the network. In addition, the ROBOSmartSwitch™ software provides system and port configuration, VLAN and QoS setup, and IGMP snooping. The BCM5380M is designed to work in Unmanaged Standalone or Managed mode via the on-chip MII interface to an ARM7 CPU. This provides support for the Ethernet-like MIB, bridge MIB, layer 2 management functions, private MIB, MIB II, and 4 groups of RMON. ROBO-managed Linux® software also supports RTOS, BSP and loader, SNMP agent, console, WEB UI, spanning tree, Tenet UI, port mirroring, trunking and easy programming of VLAN groups, QoS priorities, and IGMP snooping. Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/ or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2004 by BROADCOM CORPORATION. All rights reserved. 5380M-PB02-R 07/08/04 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: [email protected] Web: www.broadcom.com