BCM8220 ® 2.488/2.667 GBPS ULTRA LOW POWER SONET/SDH TRANSCEIVER FEATURES SUMMARY OF BENEFITS • OC-48/STM-16 SONET/SDH transceiver • Selectable full-duplex transmission between standard rate of • Ultra low power consumption eliminates external heat sinks, 2.488 Gbps or Forward Error Correction rate of 2.667 Gbps. • Single-chip, integrated solution containing multiplexer (Mux), clock multiplication unit (CMU), demultiplexer (Demux), and clock data recovery (CDR) functions. • 4-bit, 622.08/666.84-MHz, LVDS system interface • Both line and system loopback modes • Additional diagnostic features include lock detect and loss of signal. Meets SONET/SDH jitter requirements Low power dissipation of 550 mW typical Operates at 1.8V 1.8V or 3.3V CMOS I/O interface • Selectable standard OC-48/STM-16 rate of 2.488 Gbps or Forward Error Correction rate of 2.667 Gbps, allowing for easy system configuration to maximize transmission bandwidth and data availability. • Extensive diagnostic features provide easy system troubleshooting. • Compliant with industry standards to reduce design cycle and time to market. • CMOS-based device takes advantage of the most effective silicon economy of scale. APPLICATIONS Standard CMOS fabrication process Two packages offered: • 100-pin QFP package, 14 mm ∞ 14 mm ∞ 1.4 mm • 100-pin BGA package, 11 mm ∞ 11 mm ∞ 1.71 mm • • • • • • • OC-48/STM-16 transmission Equipment SONET/SDH optical modules ADD/DROP multiplexers Digital cross-connects ATM switch backbones Terabit and edge routers DWDM systems 4 4 OTX ORX 2.488 or 2.667 (FEC) G[bs ORX OTX BCM8220 622.08 or 666.84 Mbps BCM8220 4 622.08 or 666.84 Mbps 4 Network Interface Processor BCM8220 Application Block Diagram Network Interface Processor • • • • • • fans for system airflow, and expensive high current power supplies. • High integration reduces design cycle and time to market. • Features increased port density per board and system. OVERVIEW FIFO Control RESET OVF TCK4IP TCK4IN Write Pointer Input Register DI3P DI3N 4:1 Parallelto-Serial 4 x 9 FIFO DI0P DI0N Output Retime REFCKP 2.488/2.666 GHz PLL REFCKN REF155EN TXDN M U X Read Pointer SEL2P5G TXDP B M U X TXCKP TXCKN TCK4OP TCK4ON DIVIDE-BY-4 LCKDET_CMU RTSYNC CDR SELRD1 DO0P Output Register M U X 1:4 Serialto-Parallel RDIN1P RDIN1N RDIN2P RDIN2N DO0N DO3P DO3 LOSBDLYEN CKSEL KILLRXCLK KILLRXDAT DIVIDE-BY-4 M U X LOSIB LINELBB SYSLBB TSTLBB On-chip clock synthesis is performed by the high-frequency, low-jitter, phase-locked loop on the BCM8220 transceiver chip, allowing the use of slower 77.76/155.52-MHz (83.35/166.71-MHz) external transmit clock references. RCK4ON LCKDET_CDR LOSB Loopback Logic The BCM8220 FEC-capable (Forward Error Correction), SONET/SDH transceiver is a fully integrated, SONET OC-48 (2.488/2.667 Gbps) interface serialization/deserialization device with an integrated clock multiplication unit (CMU) and integrated clock and data recovery (CDR) circuit. Output frequency is selectable at 2.488 Gbps or 2.667 Gbps, allowing use of the FEC capability. RCK4OP Clock recovery is performed by synchronizing the on-chip VCO directly to the incoming data stream. The low-jitter, LVDS interface guarantees bit error compliance with the Telcordia GR-253-CORE, ANSI, and ITUT standards. The BCM8220 is packaged in a 14 x 14 mm, 100-pin LQFP package or an 11 x 11 mm, 100-pin BGA package. Transmitter functions include: • 4-bit parallel input • Elastic buffering • 2.488/2.666 GHz clock generation • Parallel-to-serial conversion • Serial differential data output Receiver functions include: • 2.488/2.666 Gbps differential data input • Clock and data recovery • Serial-to-parallel conversion • 4-bit parallel output Broadcom®, the pulse logo, and Connecting everything® are trademarks of Broadcom Corporation and/ or its subsidiaries in the United States and certain other countries. All other trademarks mentioned are the property of their respective owners. ® BROADCOM CORPORATION 16215 Alton Parkway, P.O. Box 57013 Irvine, California 92619-7013 © 2004 by BROADCOM CORPORATION. All rights reserved. 8220-PB08-R 07/02/04 Phone: 949-450-8700 Fax: 949-450-8710 E-mail: [email protected] Web: www.broadcom.com