BO LYMIN BP320240E Feature 1. FSTN LCD, TAB IC and PCB package 2. Built-in controller SED1335 3. +3V ~ +5V single power supply, with built-in positive voltage for LCD driving 4. 1/240 duty cycle 5. Option: LED/white 6. Option: Touch panel & touch panel controller Mechanical Data Item Standard Value Module Dimension 85.0 x 98.2 Viewing Area 62.0 x 81.8 Dot Size 0.225 x 0.225 Dot Pitch 0.24 x 0.24 Pin Assignment /RST /RD /WR /CS Ao DB0-7 Vdd Vss 80s:write signal/68s: R/W signal Electronic Characteristics Symbol Condition Typical Unit Value 3.0~5.0 V Input Voltage Vdd Supply Current Idd Vdd = +3V 10 mA LCD Driving 22.9 V Vlcd Voltage Item Chip select Data type select Data bus line Power supply (+3V ~ +5V) Power supply (GND) Contrast Adjustment Vadj NC NC SK*/X1** Serial clock/touch panel left signal (X axis) D0*/X2** Data output/touch panel right signal (X axis) D1*/Y1** Data input/touch panel upper signal (Y axis) CS*/Y2** Chip select/touch panel lower signal (Y axis) Interrupt INT LED A/K Power supply for LED/L *Built-in touch panel ontroller/oller/ Remark ** External touch panel controller Dimension LED Supply Current I led Vled = +3.3V 85.0±0.3 79.0±0.3 8.6 max 73.0±0.3 62.0(VA) 6.7 57.585(AA) TAB 66137 TAB 66130 4 1 1 76.785(AA) 81.8(VA) 24 CN2 FFC P1.0*23 66.8 44.1±0.3 93.3±0.3 89.8Touch Panel CN3 1 A 24 7.908 2.2 3.0 5.4 STIFFENER 35.4 71.2Touch Panel 0.24 0.225 0.24 0.225 A BLOCK SCALE 20/1 P1.0*23=23.0 3 4 5 6~13 14 15 16 17 18 19 20 21 22 23~24 (Options : Frame without ears) Function Reset signal 80s:read signal/68s:enable signal (E) Contact Stiffener The non-specified tolerance of dimension is ±0.3 mm . CN1 K 50±0.5 A 12.0 43.85 2 Symbol 9.35 P1.0*23=23.0 Pin 1 Unit mm mm mm mm 30 mA