BO LYMIN BP320240F Feature 1. FSTN LCD, TAB IC and PCB package 2. No controller , SED1335 recommended 3. +3V ~ +5V single power supply, with built-in positive voltage for LCD driving 4. 1/240 duty cycle 5. Option: LED/white 6. Option: Touch panel & touch panel controller Mechanical Data Item Standard Value Module Dimension 85.0 x 98.2 Viewing Area 62.0 x 81.8 Dot Size 0.225 x 0.225 Dot Pitch 0.24 x 0.24 Pin Assignment Pin 1~4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20,21 22,24 Symbol DB0-3 /Dispoff FLM M LP CP Vdd Vss EL-on Vadj /RST SK*/X1** D0*/X2** D1*/Y1** CS*/Y2** INT EL1~EL2 NC Unit mm mm mm mm Function (Option: Frame without ears) Data Bus L:display off Electronic Characteristics Start line signal Alternate signal Symbol Condition Typical Unit Value 3.0~5.0 V Input Voltage Vdd Supply Current Idd Vdd = +3V 10 mA LCD Driving 22.9 V Vlcd Voltage Item Data latch clock Data Shift clock Power supply (+3V ~ +5V) Power supply (GND) H:EL on Contrast Adjustment Reset signal Serial clock/touch panel left signal (X axis) Data output/touch panel right signal (X axis) Data input/touch panel upper signal (Y axis) Chip select/touch panel lower signal (Y axis) Interrupt Power supply for LED B/L Built-in EL Inverter Supply Current I led Vled= +3.3V Dimension 85.0±0.3 79.0±0.3 73.0±0.3 62.0(VA) TAB 66137 TAB 66130 24 1 7.908 2.2 5.4 STIFFENER 3.0 CN2 FFC P1.0*23 A 35.4 P1.0*23=23.0 76.785(AA) 81.8(VA) 1 66.8 44.1 93.3±0.3 89.8Touch Panel 4 1 CN3 24 CN1 K 50±0.5 A 43.85 57.585(AA) 6.608 6.7 9.35 P1.0*23=23.0 8.6 max 12.0 71.2Touch Panel CON1 0.24 0.225 0.24 0.225 A BLOCK SCALE 20/1 Contact Stiffener The non-specified tolerance of dimension is ±0.3 mm . 30 mA