Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company TRIAC CJDX136 TO-251 ( I PAK) Plastic Package For use in high bidirectional transient and blocking voltage applications, and for high thermal cycling performance. Typical Applications include Motor Control, Industrial and Domestic Lighting, Heating and Static Switching. ABSOLUTE MAXIMUM RATINGS PARAMETER Repetitive Peak Off State Voltage RMS on State Current Non Repetitive Peak on State Current l2t for Fusing Repetitive Rate of Rise of on State Current After Triggering SYMBOL *VDRM IT (RMS) ITSM I2 t dlT/dt UNIT V 25 27 3.1 A A A2s 50 50 50 10 2.0 5.0 5.0 0.5 - 40 to +150 125 A/µs A/µs A/µs A/µs A V W W ºC ºC 3.0 max 3.7 max 60 typ K/W K/W K/W full sine wave, Tmb <107ºC full sine wave, TJ=25ºC prior to t=20ms t=16.7ms t=10ms A ITM=6A, IG=0.2A, dlG/dt=0.2A/µs T2+ G+ T2+ GT2- GT2- G+ IGM Peak Gate Current VGM Peak Gate Voltage PGM Peak Gate Power P Average Gate Power G (AV) Tstg Storage Temperature Tj Operating Junction Temperature *The rate of rise of current should not excees 3A/µ µs THERMAL RESISTANCE Junction to Mounting Base Rth (j-mb) Junction to Ambient (typical) Rth (j-a) Over any 20ms period full cycle half cycle in free air ELECTRICAL CHARACTERISTICS (TJ=25ºC unless specified otherwise) PARAMETER SYMBOL TEST CONDITION IGT VD=12V, IT=0.1A Gate Trigger Current T2+ G+ T2+ GT2- GT2- G+ MARKING VALUE 600 4.0 TEST CONDITION MIN MAX UNIT 35 35 35 70 mA mA mA mA CJDX 136 XY MX XY= Date Code CJDX136Rev200106E Continental Device India Limited Data Sheet Page 1 of 4 TRIAC CJDX136 TO-251 ( I PAK) Plastic Package ELECTRICAL CHARACTERISTICS (TJ=25ºC unless specified otherwise) PARAMETER Latching Current Holding Current On State Voltage Gate Trigger Voltage SYMBOL IL IH VT VGT TEST CONDITION VD=12V, IGT=0.1A T2+ G+ T2+ GT2- GT2- G+ VD=12V, IGT=0.1A IT=5A VD=12V, IT=0.1A VD=400V, IT=0.1A,TJ=125ºC MIN VD=max, VDRM=max, TJ=125ºC SYMBOL TEST CONDITION MIN Critical Rate of Rise of off State Voltage dVD/dt VDM=67% VDRM=max, TJ=125ºC, exponential waveform, gate open circuit 100 Critical Rate of Change of Commutating Voltage dVcom/dt DYNAMIC CHARACTERISTICS PARAMETER Gate Controlled turn on time tgt VDM=400V, TJ=95ºC, IT(RMS)=4A, d/com/dt=1.8A/ms, gate open circuit ITM=6A, VD=VDRM max, IG=0.1A, dlG/dt=5A/µs UNIT 20 30 20 30 15 1.7 1.5 mA mA mA mA mA V V 0.25 ID Off State Leakage Current MAX V TYP 0.5 mA MAX UNIT V/µs 50 V/µs 2.0 µs CJDX136Rev200106E Continental Device India Limited Data Sheet Page 2 of 4 CJDX136 TO-251 ( I PAK) Plastic Package Component Disposal Instructions 1. CDIL Semiconductor Devices are RoHS compliant, customers are requested to please dispose as per prevailing Environmental Legislation of their Country. 2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). CJDX136Rev200106E Continental Device India Limited Data Sheet Page 3 of 4 Customer Notes CJDX136 TO-251 ( I PAK) Plastic Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150,4141 1112 Fax + 91-11-2579 5290, 4141 1119 [email protected] www.cdilsemi.com CJDX136Rev200106E Continental Device India Limited Data Sheet Page 4 of 4