Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company NPN SILICON EPITAXIAL TRANSISTOR CMBT2484 SOT23 PIN CONFIGURATION (NPN) 1 = BASE 2 = EMITTER 3 = COLLECTOR 3 MARKING: 1U 1 2 LOW NOISE TRANSISTOR ABSOLUTE MAXIMUM RATINGS (Ta=25 deg C) DESCRIPTION SYMBOL VCBO Collector -Base Voltage VCEO Collector -Emitter Voltage VEBO Emitter Base Voltage IC Collector Current -Continuous PD Device Dissipation FR-5 Board* Derate above 25 deg C Rth (j-a) Thermal Resistance Junction to Ambient PD Device Dissipation Alumina Substrate** Derate above 25 deg C Rth (j-a) Thermal Resistance Junction to Ambient Junction and Storage Temperature Range Tj,Tstg VALUE 60 60 6 50 225 1.8 556 300 2.4 417 -55 to +150 UNIT V V V mA mW mW/deg C deg C/W mW mW/deg C deg C/W deg C *FR-5=1.0X0.75X0.062 in **Alumine=0.4x0.3x0.024 in 99.5% alumina. ELECTRICAL CHARACTERISTICS (TA=25 deg C unless otherwise noted) CHARACTERISTICS SYMBOL TEST CONDITION Collector -Emitter Voltage Collector -Base Voltage Emitter Base Voltage Collector Cut off Current VCEO VCBO VEBO ICBO IC=10mA, IB=O IC=10uA, IE=0 IE=10uA, IC=0 VCB=45V, IE=0 Collector Emitter Saturation Voltage Base Emitter On Voltage VCB=45V, IE=0 TA=150 deg C IEBO VEB=5V, IC=0 hFE IC=1mA, VCE=5V IC=10mA, VCE=5V VCE(Sat) IC=1mA,IB=0.1mA VBE(on) IC=1mA, VCE=5V SMALL SIGNAL CHARACTERISTICS Output Capacitance Cobo Input Capacitance Cibo Noise Figure NF Emitter Cut off Current DC Current Gain Continental Device India Limited VCB=5V, IE=0 f=1MHz VBE=0.5V, IC=0 f=1MHz IC=10uA, VCE=5V RS=10 kohms f=1kHz, BW=200Hz Data Sheet MIN TYP MAX UNIT 60 60 6.0 - - 10 V V V nA - - 10 uA 250 - - 10 800 0.35 0.95 nA - - 6.0 pF - - 9.0 pF - - 4.0 dB V V Page 1 of 3 SOT-23 Formed SMD Package SOT-23 Package Reel Information Reel specifications for W" Packing (13" reel) ±0.05 2.50 14.4 MAX ±0.02 0.60 9.2± 0.5 180 or 330 3 2 +0.5 –0.2 ø13.0 ø20.2 MIN 3° 3° DETAIL X ±0.025 0.95 R0.08 All dime nsions in m m 330 / 180 mm – Antistatic Coated Plastic R eel N O TES: 8m m Ta pe Size of Reel 330 mm (13") 10,000 Pcs ±4" 0.21 5° 7° N o. of D evices ±0.04 0.06 ±0.01 0.12 RO.08 ±0.02 0.60 0.08 PARTING LINE 6° 2.0± 0.5 ± 0.02 0.60 ± 0.02 0.60 1.30 7° 0.08 ±3" 1. 2. 3. ±0.05 2.50 4. 5. 8m m Ta pe Size of Reel 180 mm (7") 3,000 P cs The ba ndolier of 330 m m reel contains a t least 1 0,000 devices. The ba ndolier of 180 m m reel contains a t least 3 ,000 devices. N o m ore than 0.5 % m issing devices / re el. 50 e mpty com partme nts for 33 0 m m reel. 15 em pty com partm ents for 180 mm reel. Three consecutive em pty place s might b e found provide d this gap is fo llowed by 6 consecutive devices. The carrier tape (leader) starts w ith at least 75 em pty positions (e quivalen t to 330 m m). In o rder to fix the carrier ta pe a self adhesive tape of 20 to 50 mm is applied. At the end of the bandolier at least 40 em pty positions (eq uivalen t to 160 mm ) are there. Tape Specification for SOT-23 Surface Mount Device ± 0.1 4.0 ± 0.05 ± 0.1 2.0 4.0 ± 0.05 1.55 ± 0.1 1.75 +0.3 ± 0.05 - 0.1 3.5 8.0 5.75 MAX ± 0.10 2.77 ± 0.1 1.22 1.0 1.6 MAX ± 0.05 ± 0.10 3.15 Direction of Unreeling All dimensions in mm Packing Detail PACKAGE SOT-23 T&R STANDARD PACK INNER CARTON BOX Details Net Weight/Qty Size 3K/reel 136 gm/3K pcs 10K/reel 415 gm/10K pcs 3" x 7.5" x 7.5" 9" x 9" x 9" 13" x 13" x 0.5" Continental Device India Limited Qty Data Sheet 12.0K 51.0K 10.0K OUTER CARTON BOX Size 17" x 15" x 13.5" 19" x 19" x 19" 17" x 15" x 13.5" Qty Gr Wt 192.0K 408.0K 300.0K 12 kgs 28 kgs 16 kgs Page 2 of 3 LEADER +0.08 cL ø329.2± 0.5 / 178 ± 0.5 FIXING TAPE ±0.05 1.90 ±0.025 2.90 1 ø100.0± 0.5 / ø 54.5 ± 0.5 TRAILER ±0.025 1.30 7.9 – 10.9 0.40 -0.02 ± 0.02 0.60 Customer Notes Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 [email protected] www.cdilsemi.com Continental Device India Limited Data Sheet Page 3 of 3