Continental Device India Limited An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company NPN SILICON PLANAR EPITAXIAL TRANSISTOR CSC2713 PIN CONFIGURATION (NPN) SOT-23 Formed SMD Package 1 = BASE 2 = EM ITTER 3 = COLLECTOR 3 1 2 MARKING CSC2713 =13 CSC2713G =13G CSC2713L =13L Complementary CSA1163 Audio Frequency General Purpose Amplifier Applications ABSOLUTE MAXIMUM RATINGS (Ta=25ºC) DESCRIPTION SYMBOL VCBO Collector Base Voltage VCEO Collector Emitter Voltage VALUE 120 120 UNITS V V VEBO 5 V Collector Current IC 100 mA Base Current IB 20 mA Collector Power Dissipation PC 150 mW Junction Temperature Tj 125 ºC Storage Temperature Range Tstg - 55 to +125 ºC Emitter Base Voltage Electrical Characterstics (Ta=25ºC unless specified otherwise) DESCRIPTION SYMBOL ICBO CONDITIONS VCB=120V, IE=0 Emitter Cut Off Current IEBO VEB=5V, IC=0 DC Current Gain Collector Emitter Saturation Voltage hFE VCE=6V, IC=2mA Collector Cut Off Current VCE (sat) MIN TYP 200 MAX 100 UNIT nA 100 nA 700 IC=10mA, IB=1mA 0.3 V fT VCE=6V, IC=1mA 100 MHz Output Capacitance Cob VCB=10V, IE=0, f=1MHz 4 pF Noise Figure NF VCE=6V, IC=0.1mA, f=1KHz, Rg=10kâĤ Transition Frequency hFE Classification G : 200 - 400 10 L : 350 - 700 CSC2713Rev_1 021203E Continental Device India Limited Data Sheet Page 1 of 3 dB CSC2713 SOT-23 Formed SMD Package SOT-23 Formed SMD Package SOT-23 Package Reel Information Reel Specifications for W Packing (13") and 7" ±0.05 2.50 14.4 MAX ±0.02 0.60 ±0.025 1.30 ø100.0±0.5 / ø 54.5 ±0.5 1 +0.08 -0.02 9.2±0.5 cL 3 3° 3° ±3" ±0.04 0.06 5° 8mm Tape Size of Reel 330 mm (13") 10,000 Pcs NOTES: ±4" 7° All dimensions in mm 330 / 180 mm â Antistatic Coated Plastic Reel 1. 2. 3. ±0.05 2.50 4. 5. 8mm Tape Size of Reel 180 mm (7") 3,000 Pcs FIXING TAPE ±0.025 0.95 R0.08 ±0.02 0.60 RO.08 DETAIL X No. of Devices The bandolier of 330 mm reel contains at least 10,000 devices. The bandolier of 180 mm reel contains at least 3,000 devices. No more than 0.5% missing devices / reel. 50 empty compartments for 330 mm reel. 15 empty compartments for 180 mm reel. Three consecutive empty places might be found provided this gap is followed by 6 consecutive devices. The carrier tape (leader) starts with at least 75 empty positions (equivalent to 330 mm). In order to fix the carrier tape a self adhesive tape of 20 to 50 mm is applied. At the end of the bandolier at least 40 empty positions (equivalent to 160 mm) are there. Tape Specification for SOT-23 Surface Mount Device ±0.1 4.0 ±0.05 ±0.1 2.0 4.0 ±0.05 1.55 ±0.1 1.75 +0.3 ±0.05 - 0.1 3.5 8.0 5.75 MAX ±0.10 2.77 ±0.1 1.22 ±0.05 1.0 1.6 MAX 3.15 Direction of Unreeling All dimensions in mm Packing Detail PACKAGE SOT-23 T&R STANDARD PACK INNER CARTON BOX Details Net Weight/Qty Size 3K/reel 136 gm/3K pcs 3" x 7.5" x 7.5" 12 K 9" x 9" x 9" 51 K 13" x 13" x 0.5" 10 K 10K/reel 415 gm/10K pcs Qty OUTER CARTON BOX Size Qty Gr Wt 17" x 15" x 13.5" 192 K 12 kgs 19" x 19" x 19" 408 K 28 kgs 17" x 15" x 13.5" 300 K 16 kgs CSC2713Rev_1 021203E Continental Device India Limited LEADER 2.0±0.5 0.08 PARTING LINE ±0.01 0.12 +0.5 â0.2 ø13.0 ø20.2 MIN ± 0.02 0.60 ± 0.02 0.60 1.30 7° 0.08 0.21 TRAILER 180 or 330 2 6° 7.9 â 10.9 ø329.2±0.5 / 178 ±0.5 0.40 ±0.05 1.90 ±0.025 2.90 ± 0.02 0.60 Data Sheet Page 2 of 3 Customer Notes CSC2713 SOT-23 Formed SMD Package Disclaimer The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s). CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice. CDIL is a registered Trademark of Continental Device India Limited C-120 Naraina Industrial Area, New Delhi 110 028, India. Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-2579 5290, 5141 1119 [email protected] www.cdilsemi.com CSC2713Rev_1 021203E Continental Device India Limited Data Sheet Page 3 of 3