CEL NESG204619

PRELIMINARY DATA SHEET
NEC's NPN SiGe TRANSISTOR NESG204619
FOR LOW NOISE, HIGH-GAIN AMPLIFICATION
FEATURES
•
IDEAL FOR LOW NOISE, HIGH-GAIN AMPLIFICATION APPLICATIONS:
NF = 0.8 dB TYP., Ga = 11.0 dB TYP. @ VCE = 1 V, IC = 3 mA, F = 2 GHZ
•
HIGH BREAKDOWN VOLTAGE TECHNOLOGY FOR SIGE TRANSISTORS:
VCEO (ABSOLUTE MAXIMUM RATINGS) = 5.0 V
•
3-PIN SUPER MINIMOLD (19) PACKAGE
ORDERING INFORMATION
PART NUMBER
QUANTITY
SUPPLYING FORM
NESG204619-A
50 pcs (Non reel)
• 8 mm wide embossed taping
NESG204619-T1-A
3 kpcs/reel
• Pin 3 (Collector) face the perforation side of the tape
Remark To order evaluation samples, contact your nearby sales office.
The unit sample quantity is 50 pcs.
ABSOLUTE MAXIMUM RATINGS (TA =+25ºC)
PARAMETER
SYMBOL
RATINGS
UNIT
Collector to Base Voltage
VCBO
13
V
Collector to Emitter Voltage
VCEO
5
V
Emitter to Base Voltage
VEBO
1.5
V
IC
40
mA
Ptot Note
200
mW
Junction Temperature
Tj
150
°C
Storage Temperature
Tstg
−65 to +150
°C
Collector Current
Total Power Dissipation
Note Mounted on 1.08 cm2 × 1.0 mm (t) glass epoxy PCB
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
California Eastern Laboratories
NESG204619
ELECTRICAL CHARACTERISTICS (TA =+25ºC)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
DC Characteristics
Collector Cut-off Current
ICBO
VCB = 5 V, IE = 0 mA
−
−
100
nA
Emitter Cut-off Current
IEBO
VEB = 0.5 V, IC = 0 mA
−
−
100
nA
VCE = 1 V, IC = 2 mA
140
180
220
−
VCE = 1 V, IC = 15 mA, f = 2 GHz
15
18
−
GHz
|S21e|
VCE = 1 V, IC = 15 mA, f = 2 GHz
10
12
−
dB
NF
VCE = 1 V, IC = 3 mA, f = 2 GHz,
ZS = ZSopt, ZL = ZLopt
−
0.8
1.5
dB
Ga
VCE = 1 V, IC = 3 mA, f = 2 GHz,
ZS = ZSopt, ZL = ZLopt
9.0
11.0
−
dB
Cre Note 2
VCB = 1 V, IE = 0 mA, f = 1 MHz
−
0.2
0.4
pF
DC Current Gain
hFE
Note 1
RF Characteristics
Gain Bandwidth Product
fT
Insertion Power Gain
2
Noise Figure
Associated Gain
Reverse Transfer Capacitance
Notes 1. Pulse measurement: PW ≤ 350 μs, Duty Cycle ≤ 2%
2. Collector to base capacitance when the emitter is grounded.
hFE CLASSIFICATION
RANK
FB
Marking
T7
hFE Value
140 to 220
NESG204619
PACKAGE DIMENSIONS
3-PIN SUPER MINIMOLD (19 PACKAGE) (UNIT: mm)
1.6±0.1
0.2+0.1
-0
0.8±0.1
3
0.15+0.1
-0.05
0 to 0.1
0.6
0.75±0.05
1
0.3+0.1
-0
0.5
0.5
1.0
T7
1.6±0.1
2
PIN CONNECTIONS
1. Emitter
2. Base
3. Collector
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
09/09/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.