CLARE CPC1002NTR

CPC1002N
4-Pin SOP OptoMOS® Relay
Blocking Voltage
Load Current
Max On-resistance
LED Current to operate
CPC1002N
60
700
0.55
2
Description
Units
V
mA
Ω
The CPC1002N is a miniature 1-Form-A DC solid
state relay in a 4-Pin SOP package that employs
optically coupled MOSFET technology to provide
1500Vrms of input to output isolation. The super
efficient MOSFET switches and photovoltaic die
use Clare’s patented OptoMOS architecture. The
optically coupled output is controlled by the input's
highly efficient GaAlAs infrared LED. The CPC1002N
uses Clare’s state of the art double molded vertical
construction packaging to produce the world’s
smallest relay. The CPC1002N offers board space
savings of at least 20% over the competitor’s larger
4-Pin SOP relay. It boasts the industries' lowest input
current to operate in its class.
mA
A
RY
Features
IN
Approvals
• UL recognized file #E76270
• Certified to EN60950
IM
• Designed for use in security systems complying
with EN50130-4
• Only 2mA of LED current required to operate
• Small 4-Pin SOP Package
• TTL/CMOS Compatible input
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 1500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Immune to radiated EM fields
• SMD Pick & Place, Wave Solderable
• Tape & Reel Version Available
Applications
Part #
CPC1002N
CPC1002NTR
Description
4-Pin SOP (100/tube)
4-Pin SOP (2000/reel)
Pin Configuration
PR
EL
• Security
• Passive Infrared Detectors (PIR)
• Data Signalling
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Aerospace
• Industrial Controls
Ordering Information
CPC1002N Pinout
+ Control
– Control
1
4
2
3
DC +
DC -
Switching Characteristics of
Normally Open (Form A) Devices
DS-CPC1002N-R00B
www.clare.com
1
CPC1002N
Absolute Maximum Ratings (@ 25˚ C)
Input Power Dissipation
Total Power Dissipation 1
Isolation Voltage Input to Output
Operational Temperature
Storage Temperature
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Units
V
V
mA
A
mW
mW
Vrms
°C
°C
Derate Linearly 3.33 mw / ºC
Electrical Characteristics
2
3
2
PR
1
Symbol
IN
Conditions
Min
Typ
Max
Units
-
-
700
1
0.55
1
mA
Arms
Ω
-
5
ms
25
1
2
-
ms
pF
pF
1.2
-
1.4
10
mA
mA
V
µA
IL
ILPK
RON
ILEAK
IF=3mA, VL=10V
TON
IF=3mA, VL=10V
50V; f=1MHz
-
TOFF
COUT
-
-
IL=700mA
IF=5mA
VR=5V
IF
IF
VF
IR
2
0.3
0.9
-
IM
IF=2mA
10ms
IL=100mA
VL=60V
EL
Parameter
Output Characteristics @ 25°C
Load Current, Continuous 1
Peak Load Current
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Capacitance Input to Output
Input Characteristics @ 25°C
Input Control Current 3
Input Dropout Current
Input Voltage Drop
Reverse Input Current
A
1
Ratings
60
5
50
1
70
400
1500
-40 to +85
-40 to +125
RY
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
µA
Load current derates linearly from 700mA @ 25oC to 560mA @80oC.
Measurement taken within 1 second of on time.
For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended.
www.clare.com
R00B
Manufacturing Information
Soldering
Recommended soldering processes are limited to
245ºC component body temperature for 10 seconds.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
RY
MECHANICAL DIMENSIONS
PC Board Pattern
(Top View)
A
0.38 TYP.
(0.015 TYP.)
4-Pin SOIC Narrow ("N" Suffix)
2.18 MAX.
(0.086)
IN
2.54 TYP.
(0.100 TYP.)
IM
Tape and Reel Packaging for 4 pin SOIC package
A0 = 6.50
(0.256)
330.2 DiA
(13.00" DiA)
P = 8.00
(0.315)
B0 = 4.70
(0.185)
PR
Top Cover
Tape Thickness
0.102 MAX
(0.004 MAX)
EL
A
K1 = 2.30
(0.091)
W = 12.00 MAX
(0.472 MAX)
K0 = 2.7
(0.106)
A
SECTION A-A
NOTE: Tape dimensions not shown, comply with JEDEC Standard EIA-481-2
Embossed
Carrier
Embossment
Dimensions:
mm
(inches)
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product
descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no
liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement
of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended
to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to
discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1002N-R00B
©Copyright 2005, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
6/13/05