General Purpose Rectifier 1N4001-G thru 1N4007-G Current: 1.0A Voltage: 50 ~ 1000V Features Low forward voltage drop High current capability Low reverse leakage current High surge current capability DO-41 .034(.86) DIA. .028(.71) 1.0(25.4) MIN. Mechanical Data .205(5.2) Case: Molded plastic A-405 Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.22 gram .160(4.1) .107(2.7) DIA. .080(2.0) 1.0(25.4) MIN. Dimensions in inches and (millimeters) Maximum Rating and Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. 1N 1N 1N 1N 1N 1N 1N SYMBOL 4001-G 4002-G 4003-G 4004-G 4005-G 4006-G 4007-G UNIT Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current TL = 55°C IF (AV) 1.0 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A Maximum instantaneous forward voltage @ 1.0A VF 1.1 V Maximum DC reverse current @ TJ= 25°C At Rated DC blocking voltage @ TJ= 125°C IR 5.0 250 uA Typical junction capacitance (Note 1) CJ 10 pF 45 ºC/W Typical thermal resistance (Note 2) Operating junction and storage temperature Range R JA TJ,TSTG NOTES : (1) Thermal resistance junction to lead. (2) Measured at 1.0MHz and applied reverse voltage of 4.0 Volts DC. “-G” suffix designates RoHS compliant Version -55 to +125 o C General Purpose Rectifier Ratings and Characteristic Curves 1N4001S-G thru 1N4007S-G FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 30 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive load Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 25 20 15 10 5 0 0 0 50 100 150 1 LEAD TEMPERATURE, C 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 10 100 0.1 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 0.01 0.2 0.4 0.6 0.8 1.0 1.2 1.4 o TJ=100 C INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1.0 10 1 0.1 o TJ=25 C 0.01 0 1.6 FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 10 1 0.1 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 NUMBER OF CYCLES AT 60Hz o 1.0 4.0 10 REVERSE VOLTAGE, VOLTS 100