ree dF S a Le oH ant R pli m Co CS33xx Model 5X7 mm SMD, 3.3V, CMOS Frequency Range: 1.544MHz to 156.250MHz Frequency Stability: ±20ppm to ±100ppm Temperature Range: 0°C to 70°C (Option M) -20°C to 70°C (Option E) -40°C to 85°C Storage: -55°C to 120°C Input Voltage: 3.3V ± 0.3V Input Current: 1.544~34.00MHz 18mA Max 35.00~50.00MHz 25mA Max 51.00~69.00MHz 30mA Max 70.00~156.25 MHz 45mA Max Standby Current 3uA Typ., 10uA Max Output: CMOS Symmetry: 45/55% Max @ 50% Vdd Rise/Fall Time (into 15pF Load): 1.54~10.00 MHz 5ns Max @ 20% to 80% 10.10~30.00 MHz 4ns Max @ 20% to 80% 30.10~50.00 MHz 3ns Max @ 20% to 80% 50.10~80.00 MHz 2.5ns Max @ 20% to 80% 80.10~156.25 MHz 2ns Max @ 20% to 80% Logic: "0" = 10% Vdd Max "1" = 90% Vdd Min Start-up Time: 10ms Max Load: 30pF Max, >125MHz 15pF Max Jitter RMS: 12KHz~80MHz 0.5ps Typ, 1ps Max Aging: <3ppm 1st/yr, <1ppm every year thereafter SUGGESTED PAD LAYOUT Dimensions inches (mm) All dimensions are Max unless otherwise specified. .283 Max (7.20) P/N DC Freq The CS33xx Series utilizes fundamental and 3rd overtone crystal technology to provide a low jitter output frequency. The oscillator is equipped with power saving standby feature for battery and other low drain applications. Available on 16mm tape and reel in quantities of 1K. .055 Typ. (1.40 Typ.) .204 Max (5.02) .075 Max (1.80) #1 #2 #4 #3 .071 SQ (1.80) .165 (4.19) .045 ±.008 (1.14 ±.20) .200 ±.005 (5.08 ±.13) Denotes pad 1 .200 (5.08) 0.01uF Bypass Capacitor Recommended RECOMMENDED REFLOW SOLDERING PROFILE TEMPERATURE Ramp-Up 3°C/Sec Max. Critical Temperature Zone 260°C Crystek Part Number Guide Ramp-Down 6°C/Sec. Example: CS3392-44.736MHZ Example: CSM3392-44.736MHZ Example: CSE3392-44.736MHZ 217°C 200°C 150°C Frequency Stability Temperature 0/ 70°C Preheat 180 Secs. Max. 8 Minutes Max. -20/ 70°C -40/ 85°C CS3390 CSM3390 CSE3390 CS3392 CSM3392 CSE3392 CS3391 CSM3391 CSE3391 CS3398 N/A N/A 90 Secs. Max. 260°C for 10 Secs. Max. +/- 100ppm +/- 50ppm +/- 25ppm +/- 20ppm NOTE: Reflow Profile with 240°C peak also acceptable. OUT mA M pin 3 pin 4 Vdd PWR Supply VM Bypass Cap. pin 1 OUT O/P Load incl Probe Cl OSC. GND pin 2 Standby Function Function pin 1 Oscillator State Open "1" level .7Vdd Min "0" level 0.3Vdd Max Oscillator Active Oscillator Active Oscillator Stopped *Standby Mode output = High Impedance Oscillator Stopped GND or "LOW" Oscillation OPEN or "HIGH" Specifications subject to change without notice. TD-052703 Rev.E