• VD-60A Metal Enclosed Switching Power Supply Features ·Universal AC input - full range ·Short-circuit, over-voltage and overload protection ·Cooling by free air convection ·LED indicator for power on ·Fixed switching frequency at 54KHz ·2 year warranty CH1 DC output voltage Output V. tolerance Output rated current Output current range Ripple & noise Line regulation Load regulation DC output power Efficiency DC voltage adj. Input voltage range AC current Inrush current Leakage current Overload protection Temperature coefficient Set up, rise, hold up time Vibration Withstand voltage Isolation resistance Working temp., humidity Storage temp., humidity Dimensions Weight Safety standards EMC standards Notes: CH2 5V 12V ±2% ±6% 4A 3A 0.3-6A 0.2-4A 75mVp-p 150mVp-p ±0.5% ±1.0% ±0.5% ±4.0% 56W 73% CH1:4.75-5.5V 85~264VAC; 120~370VDC 2A/115V 1A/230V cold start 30A/115V 60A/230V <3.5mA/240VAC 105%~150% type: Hiccup mode, recovers automatically after fault condition is removed ±0.03% / ºC (0~50ºC) ON +5V output 300ms, 50ms, 80ms/230VAC 800ms, 50ms, 10ms/115VAC 10~500Hz, 2G 10 min./1 cycle, period of 60 min. each axes I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, for 1 min. I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms min. -10°C~+60% (refer to output derating curve), 20%-90% RH -20°C~+85°C, 10%-95% RH 6.26x3.82x1.50inches (159x97x38mm) 1.21 lb. (0.55Kgs) UL1012, UL60950, TUV EN60950 EN61000-3-2, -3, Class A 1. All parameters are specified at 230VAC input, rated load, 25°C 70% ambient 2. Tolerance includes set up tolerance, line regulation, load regulation 3. Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a 0.1uF & 47 uF capacitor *V-Infinity reserves the right to make changes to its products or to discontinue any product or service without notice, and to advise customers to verify the most up-to-date product information before placing orders. V-Infinity assumes no liability or responsibility for customer’s applications using V-Infinity products other than repair or replacing (at V-I’s option) V-Infinity products not meeting V-I’s published specifications. Nothing will be covered outside of standard product warranty. V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258 • VD-60A Metal Enclosed Switching Power Supply Block Diagram Output Derating Static Characteristics Dimensions (mm) V-Infinity, LLC, 9615 SW Allen Blvd Suite 103, Beaverton, OR 97005 www.v-infinity.com 1-866-372-1258