CURRENT 0.8 Amperes VOLTAGE 100 to 1000 Volts S40S THRU S500S Features · Glass Passivated Die Construction · Diffused Junction · Low Forward Voltage Drop, High Current Capability · Surge Overload Rating to 30A Peak · Designed for Printed Circuit Board Applications · Plastic Material - UL Flammability Classification 94V-0 L G A B D E H C J MiniDIP K Mechanical Data · Case : Molded Plastic · Terminals : Solder Plated Leads, Solderable per MIL-STD-202, Method 2026 · Polarity : As Marked on Case · Approx. Weight : 0.125 grams · Mounting Position : Any · Marking : Type Number Dim Min Max A 5.43 5.75 B 3.60 4.00 C 0.15 0.35 D 0.05 0.20 E 7.00 G 0.70 1.10 H 4.50 4.90 2.90 J 2.80 K 2.50 2.70 L 0.50 0.80 A ll Dimens ions in mm Maximum Ratings And Electrical Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols S40S S80S S125S S250S S380S S500S Units Peak Repetitive Reverse voltage Working Peak Reverse voltage DC Blocking voltage VRMM VRWM VR 100 200 400 600 800 1000 Volts RMS Reverse voltage VRMS 70 140 280 420 560 700 Volts @ TA=40℃ Io 0.8 Amp Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) IFSM 30 Amp Forward voltage (per element) @ IF=0.4 A VFM 1.0 Volts Peak Reverse Current at Rated DC Blocking voltage (per element) @ TA=25℃ Average Rectified Output Current @ TA=125℃ IRM 10 500 μA Typical Junction Capacitance per element (Note 1) Cj 10 pF Typical Thermal Resistance, Junction to Ambient (Note 2) RθJA 75 ℃/W Operating and Storage Temperature Range Tj TSTG -55 to +150 Notes: (1) Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC. (2) Thermal Resistance, junction to ambient, measured on PC board with 5.02mm (0.03mm thick) land areas. ℃ I F , INST ANT ANEOUS FOR WARD CURRENT (A) 0.8 0.6 Ceramic PC Board 0.4 0.2 I (AV) , AVERAGE FOR WARD RECTIFIED CURRENT (A ) RATING AND CHARACTERISTIC CURVES S40S THRU S500S Resistive or Inductive Load 0 0 40 80 120 10 1.0 0.1 T j = 25 C Pulse Width = 300 s 0.01 0.2 160 35 0.6 0.8 1.0 100 1.2 1.4 1.6 T j = 25 C f = 1.0MHz C j, JUNCTION CAP ACIT ANCE (pF) 30 20 10 T A = 25 C Single Half Sine-W ave Pulse Width = 5.3ms (JEDEC Method) 10 1 0 1.0 1 10 (μA) CURRENT 100 T j = 125 C 10 1.0 T j = 25 C 0.1 0.01 0 10 V R , REVERSE VOL TAGE (V) Fi g. 4 Typical Junction Capacitance NUMBER OF CYCLES AT 60 Hz Fi g. 3 Maximum Peak Forward Sur ge Current (per leg) I R , INST ANT ANEOUS REVERSE (A) CURRENT I FSM , PEAK FOR WARD SURGE 0.4 V F , INST ANT ANEOUS FOR WARD V OLTAGE (V) Fi g. 2 T ypical Forward Characteristics (per leg) T A , AMBIENT TEMPERA TURE ( C ) Fi g. 1 Output Current Deratin g Curve 20 40 60 80 100 120 140 PERCENT OF RA TED PEAK REVERSE VOL TAGE (%) Fi g. 5 Typical Reverse Characteristics (per element ) 100