CURRENT 1.5 Amperes VOLTAGE 50 to 1000 Volts W005M THRU W10M Features · Glass Passivated Die Construction · Diffused Junction · Low Forward Voltage Drop, High Current Capability · Surge Overload Rating to 50A Peak · Ideal for Printed Circuit Boards · Case to Terminal Isolation Voltage 1500V · Plastic Material - UL Flammability Classification Rating 94V-0 A B + - D C WOB E Mechanical Data · Case : WOB, Molded Plastic · Terminals : Plated Leads Solderable per MIL-STD-202, Method 208 · Polarity : As Marked on Body · Weight : 1.3 grams (approx.) · Mounting Position : Any · Marking : Type Number - + G G Dim Min Max A 8.84 9.86 B 4.00 4.60 C 27.90 D 25.40 E 0.71 0.81 G 4.60 5.60 A ll Dimens ions in mm Maximum Ratings And Electrical Characteristics (Ratings at 25℃ ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols W005M W01M W02M W04M W06M W08M W10M Units Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRMM VRWM VR 50 100 200 400 600 800 1000 Volts RMS Reverse Voltage VRMS 35 70 140 280 420 560 700 Volts @ TA=25℃ Io 1.5 Amps Non-Repetitive Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed on rated load (JEDEC method) IFSM 50 Amps Forward Voltage (per element) @ IF=1.5 A VFM 1.0 Volts Peak Reverse Current at Rated DC Blocking Voltage @ TA=25℃ Average Rectified Output Current @ TA=125℃ Typical Junction Capacitance (Note 1) Typical Thermal Resistance, Junction to Case (Note 2) Operating and Storage Temperature Range IRM 5.0 500 μA Cj 12 pF RθJA 84 ℃/W Tj TSTG -65 to +150 Notes: (1) Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC. (2) Thermal Resistance from junction to case mounted on PC board with 13 x 13mm (0.03mm thick) land areas. ℃ RATING AND CHARACTERISTIC CURVES W005M THRU W10M 10 Single phase half-sine-wave 60Hz resistive or inductive load I F , INST ANT ANEOUS FOR WARD CURRENT (A) FOR WARD CURRENT I F , AVERAGE (A) 1.5 1.0 0.5 0 0 25 50 75 100 125 T A , AMBIENT TEMPERA TURE (°C) Fi g. 1 Forward Current Deratin g Curve 1.0 0.1 T j = 25°C Pulse width = 300µs 0.01 150 0.2 0.6 1.0 1.4 V F , INST ANT ANEOUS FOR WARD VOL TAGE (V) Fi g. 2 Typical Forward Characteristics 100 50 T j = 25°C f = 1mz 30 C j, JUNCTION CAP ACIT ANCE (pF) CURRENT 40 I FSM , PEAK FOR WARD SURGE (A) Pulse Width 8.3 ms Single Half-Sine-W ave (JEDEC Method) 20 10 0 1 100 10 1 CURRENT (µA) NUMBER OF CYCLES AT 60 Hz Fi g. 3 Max Non-Repetitive Sur ge Current I R , INST ANT ANE OUS REVERSE 1 10 10 V R , REVERSE VOL TAGE (V) Fi g. 4 Typical Junction Capacitance 200 100 T j = 100°C 10 1.0 T j = 25°C 0.1 0.01 0 PERCENT 40 80 120 160 OF RA TED PEAK REVERSE VOL TAGE (% ) Fig. 5 Typical Reverse Characteristics 100