F E AT U R E S MODEL NO. 100C10 3 2 1 0 0 - 14 0 0 MHz 0.5 dB Insertion Loss 20 Watts CW TTL Driver SMA, BNC or TNC Connectors SP2T Medium Power PIN Diode SP2T 1.00±.03 2.75±.03 PART IDENTIFICATION 2.250 . 25 .50 J1 J3 J2 1.75 .06 . 25 J3 +5V CONT 1.250 J1 .149 DIA THRU (4 PLACES) 1.7 5 ± .0 3 -5V GND J2 • • TERM., SOLDER 4 PLACES 1.00 CONNECTOR, SMA, BNC, OR TNC FEMALE (3 PLACES) .xx = .02 .xxx = .010 +5V CONT “0” -5V GND PART NO. EXAMPLE 100C1032 - SMA VSWR I.L. (dB) ISO (dB) SPECIFY CONNECTOR TYPE BASIC PART NUMBER 1.6 1.2 120 1.5 1.0 100 GUARANTEED PERFORM A NCE T Y P IC A L P E R F OR MA NCE Parameter Min Typ Max Units Operating Frequency DC Current Control Type 100 0.8 80 1.3 0.6 60 1.2 0.4 0.2 20 1.0 0 0 TTL High Low Insertion Loss Isolation ISO 60 40 VSWR Thru Impedance Switching Speed RF Power Operate Operating Temperature -55 VSWR 40 1.1 MHz mA at 25 ° C Control Current 1.4 1400 .38 70 50 1.14/1 50 +25 80 -3.2 0.5 µA mA dB dB dB 40 100 400 FREQUENCY (MHz) DA I C O In d u s t r i e s 1000 3000 See Table 1 Line Logic “0” = J3 - J1 Logic “1” = J3 - J2 VIH = +2.7V VIL = +0.4V 100 - 500 MHz 500 - 1400 MHz 1.3/1 10 20 +85 OHMS µSEC 50% TTL to 90% / 10% RF W CW °C TA I. LOSS 10 Conditions CURRENT TABLE LOGIC “1” +5V AT 30 mA -5V AT 160 mA Logic “0” +5V AT 160 mA -5V AT 0mA